• Compatibility:
  • 1999-2000 Ford Contour 2.5L
    1997-1998 Ford E-150 Econoline 4.2L
    1997-1998 Ford E-150 Econoline Club Wagon 4.2L
    1997-1998 Ford E-250 Econoline 4.2L
    1996-1999 Ford Taurus 3.0L
    1997-2005 Ford F-150 4.2L
    2004 Ford F-150 Heritage 4.2L
    1999-2000 Ford Mystique 2.5L
    1996-1998 Ford Windstar 3.8L
    1999-2000 Mercury Cougar 2.5L
    1999-2000 Mercury Mystique 2.5L
    1996-1999 Mercury Sable 3.0L
  •  
  • Specification:
  • Condition: 100% Brand New Mass Airflow Sensor / Meter
  • Replacement: Directly Replacement
  • Material: Plastic
  • Number Of Pins: 5
  • Color: Black (As picture showed)
  • Warranty: 1 Year
  • For Ford Taurus 3.0L Windstar 3.8L V6 Mass Air Flow Meter MAF Sensor 1996 -1999

    Compatibility:

    1999-2000 Ford Contour 2.5L
    1997-1998 Ford E-150 Econoline 4.2L
    1997-1998 Ford E-150 Econoline Club Wagon 4.2L
    1997-1998 Ford E-250 Econoline 4.2L
    1996-1999 Ford Taurus 3.0L
    1997-2005 Ford F-150 4.2L
    2004 Ford F-150 Heritage 4.2L
    1999-2000 Ford Mystique 2.5L
    1996-1998 Ford Windstar 3.8L
    1999-2000 Mercury Cougar 2.5L
    1999-2000 Mercury Mystique 2.5L
    1996-1999 Mercury Sable 3.0L

     

    Specification:

    Condition: 100% Brand New Mass Airflow Sensor / Meter

    Replacement: Directly Replacement

    Material: Plastic

    Number Of Pins: 5

    Color: Black (As picture showed)

    Warranty: 1 Year

    Interchange Part number: TF-MAF025, 038906461B, 038 906 461 B, 038906461BX, 0986284009, 0 986 284 009, 0281002531, 0 281 002 531

    One kind of the MFA sensor (for reference) : 

     

    About the mass air flow (MAF) sensor:

    * What does a MAF Sensor do?
    The Mass Air Flow (MAF) sensor measures the amount of air flow entering the intake manifold using a heated grid or wire. The PCM uses this signal primarily for fuel control.

    * Where are these sensors located?
    The Mass Air Flow sensor is located in the intake ducting after the air filter.

    * Installing the replacement MASS AIR FLOW SENSOR(MAF):
    1. Position MAF sensor in the vehicle. Make sure the airflow direction indicated on the sensor is toward the engine.
    2. Install sensor to air duct seal(s), if so equipped, on the replacement MAF sensor.
    3. Connect the MAF sensor to the throttle body air cleaner ducts. If the sensor mounts directly on the throttle body, install and tighten the mounting screws to 10 ft-lb. DO NOT OVERTIGHTEN!
    4. Position clamps over the air duct/MAF sensor connections and tighten. Replace the clamps if necessary. (NOTE: For the MAF sensor to work properly, the sensor/air duct connections must be airtight.)
    5. Carefully plug the harness connector lead into the MAF sensor.

     

    Packaging:

    1x Mass Air Flow Sensor/Meter


    Item Specifics
    Manufacturer Part Number C11507601APS
    Brand CLASSIC AutoParts
    Manufacturer Warranty 10 Year
    Type Mass Airflow Sensor (MAF Mass Air Flow Sensor/Meter)
    Placement on Vehicle Front
    Color Black
    Numbers of Pin 6pins
    Interchange Part Number F6DF12B579EA-A
    w/ housing Yes
    Replace Direct Replacement
    Package 1pcs of Brand New MAF Sensor
    Replace Direct Replacement
    Package 1pcs of Brand New MAF Sensor

    Payment
    1. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
     
    2.if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.
    Shipping
    1.All the orders are shipped from USA warehouse.
     
    2.Orders processed within 24 hours of payment verification.
     
    3. The images shown are not the actual item and are for your reference only.
     
    4.If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
    Returns

    We stand behind every product we sell.

    All of our brand new items come with a 30-Day money-back or exchange guarantee.

    Contact Us

    If there is an issue with shipping or the item you purchased please contact us via ebay message or call us before opening a case or leaving feedback.We will try our best to resolve any kind of issue.

    Feedback

      We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

    Fast and Free
    Best seller
    For Ford Taurus 3.0L Windstar 3.8L V6 Mass Air Flow Meter MAF Sensor 1996 -1999

    Compatibility:

    1999-2000 Ford Contour 2.5L
    1997-1998 Ford E-150 Econoline 4.2L
    1997-1998 Ford E-150 Econoline Club Wagon 4.2L
    1997-1998 Ford E-250 Econoline 4.2L
    1996-1999 Ford Taurus 3.0L
    1997-2005 Ford F-150 4.2L
    2004 Ford F-150 Heritage 4.2L
    1999-2000 Ford Mystique 2.5L
    1996-1998 Ford Windstar 3.8L
    1999-2000 Mercury Cougar 2.5L
    1999-2000 Mercury Mystique 2.5L
    1996-1999 Mercury Sable 3.0L

     

    Specification:

    Condition: 100% Brand New Mass Airflow Sensor / Meter

    Replacement: Directly Replacement

    Material: Plastic

    Number Of Pins: 5

    Color: Black (As picture showed)

    Warranty: 1 Year

    Interchange Part number: TF-MAF025, 038906461B, 038 906 461 B, 038906461BX, 0986284009, 0 986 284 009, 0281002531, 0 281 002 531

    One kind of the MFA sensor (for reference) : 

     

    About the mass air flow (MAF) sensor:

    * What does a MAF Sensor do?
    The Mass Air Flow (MAF) sensor measures the amount of air flow entering the intake manifold using a heated grid or wire. The PCM uses this signal primarily for fuel control.

    * Where are these sensors located?
    The Mass Air Flow sensor is located in the intake ducting after the air filter.

    * Installing the replacement MASS AIR FLOW SENSOR(MAF):
    1. Position MAF sensor in the vehicle. Make sure the airflow direction indicated on the sensor is toward the engine.
    2. Install sensor to air duct seal(s), if so equipped, on the replacement MAF sensor.
    3. Connect the MAF sensor to the throttle body air cleaner ducts. If the sensor mounts directly on the throttle body, install and tighten the mounting screws to 10 ft-lb. DO NOT OVERTIGHTEN!
    4. Position clamps over the air duct/MAF sensor connections and tighten. Replace the clamps if necessary. (NOTE: For the MAF sensor to work properly, the sensor/air duct connections must be airtight.)
    5. Carefully plug the harness connector lead into the MAF sensor.

     

    Packaging:

    1x Mass Air Flow Sensor/Meter



    1. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
     
    2.if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.
    1.All the orders are shipped from USA warehouse.
     
    2.Orders processed within 24 hours of payment verification.
     
    3. The images shown are not the actual item and are for your reference only.
     
    4.If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    We stand behind every product we sell.

    All of our brand new items come with a 30-Day money-back or exchange guarantee.

    If there is an issue with shipping or the item you purchased please contact us via ebay message or call us before opening a case or leaving feedback.We will try our best to resolve any kind of issue.

      We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.


    All rights reserved.