CIean Injection 1200cc Series Bosch Fuel Injectors for Honda/Acura B, D, H Series Engine.
Clean Injection 1200cc Series line of injectors are here. Our latest addition to our Pro series Injectors. Designed to suit Honda/Acura D, B, and H Series engine. Injectors will come with our custom billet injector port adapters which eliminates the use of the factory large lower seals. Provides a leak proof seal now matter how much fuel pressure is thrown at the injectors. Injectors will also come with plug connectors with terminal and seals.
NOTE: Injectors are high impedance so no resistor box/injector drivers necessary. If your vehicle is fitted with a factory resistor box then it must be removed/bypassed.
The injectors are compatible with all known fuels including e85. The injectors retains a consistent linear flow from 2bar to 5bar fuel pressure. Very tuner friendly with fuel trimming down to 1.1ms. The injectors will support 600whp at 3 bar with correct tuning and fuel type. Raise fuel pressure to 4 bar and the injectors will support 700whp. CI 1200 series injectors utilize a 30 degree mist spray pattern with excellent fuel atomization resulting in superb idle conditions. Every set of Injectors that leaves our shop is goes through extensive testing on industry leading ASNU Classic test equipment. Injectors are flow tested statically, dynamically, and tested at different fuel pressures ranging from 2 bar to 7 bar. They are then sealed and packed in balanced sets within 1 percent with tuning paperwork. Injectors will come with flow sheet with full data specs including injector latency/dead time data to make tuning breeze.
INJECTOR FEATURES:
- Flow Matched Sets within ≤ 1% Static and Dynamic flow rates
- Full Injector Latency Data Provided
- Tunable to factory Rock solid Idle
- Excellent Fuel Atomization
- Direct Plug and Play Fit
- Fast Response time
- Consistent performance all the way to 7 BAR
- 2 Year Unlimited Mile Warranty
- Stainless Steel Internals
- Compatible with all known race fuels including E85
Vehicle Compatibility Guide:
- 1996-2000 CIVIC/DEL SOL (ALL TRIMS)
- 1996-2000 INTEGRA (ALL TRIMS)
- 1997+ PRELUDE (ALL TRIMS)
- 1996 + ACCORD 4 cylinder (ALL TRIMS)
- Will Also fit all OBD0 & OBD1 JDM engines! Please contact us for obd1 connectors .
Vehicle Compatibility Guide:
- 1996-2000 CIVIC/DEL SOL (ALL TRIMS)
- 1996-2000 INTEGRA (ALL TRIMS)
- 1997+ PRELUDE (ALL TRIMS)
- 1996 + ACCORD 4 cylinder (ALL TRIMS)
- Will Also fit all OBD0 & OBD1 JDM engines!
INJECTOR SPECS:
Nominal Flow Rate – 1200cc @ 3.0 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F)
Maximum Differential Fuel Pressure – 10.0 Bar (145.0 psi)
Fuel Compatibility – Compatible With All Known Fuels
Electrical Connector – EV1
Coil Resistance: 12 OHMS
LISTING INCLUDES:
- 4pcs CI 1200 SERIES fuel injectors
- 4pcs EV1 Fuel injector connectors with terminals and seals
- 4pcs Billet Fuel injector port adapters
- 3pcs fuel rail spacers
INTAKE MANIFOLD IS NOT INCLUDED IN THIS LISTING. PICTURE IS FOR REFERECE ONLY!
SHIPPING:
- Shipping within the U.S is free.
- International shipping is 48.99
- Orders are shipped within 24 hours of cleared payment.
WARRANTY:
- Product is covered with our 2 year unlimited mile warranty. Warranty will cover mechanic errors only. Warranty does not apply to damage caused by user error, alterations, or improper installation.
CUSTOMER SERVICE:
- Customer service is the experience we deliver to our customer. It's the promise we keep to our customers. It's how we follow through for our customers. It's how we make them feel when they do business with us. If you have any issues whatsoever please feel free to contact us and we will take care of any issues or questions you may have.