• CV Axle Installation Guide (Generic Steps)
  •  
  • ?? Important Safety Notice:
  •  
    • Professional Recommendation:? CV axle replacement involves heavy components and precise torque specifications. We strongly recommend this job be performed by a qualified mechanic with proper tools (jack stands, torque wrench, etc.).
     
    • Check Fitment:? Verify this axle matches your vehicle’s Make, Model, Year, and Drivetrain (FWD/RWD/AWD) before starting.
     
    • Refer to your vehicle’s service manual for exact steps and torque values.
    ?
  • ?
  •  
  • Tools Needed:
  •  
    • Floor jack & Jack stands

    • Front Right Passenger CV Axle Shaft Assembly For BMW X3 2018-2023 X4 2019-2022

    CV Axle Installation Guide (Generic Steps)

     

    ?? Important Safety Notice:

     

    • Professional Recommendation:? CV axle replacement involves heavy components and precise torque specifications. We strongly recommend this job be performed by a qualified mechanic with proper tools (jack stands, torque wrench, etc.).

     

    • Check Fitment:? Verify this axle matches your vehicle’s Make, Model, Year, and Drivetrain (FWD/RWD/AWD) before starting.

     

    • Refer to your vehicle’s service manual for exact steps and torque values.

    ?

    ?

     

    Tools Needed:

     

    • Floor jack & Jack stands

    • Wheel chocks

    • Socket set & Breaker bar

    • Torque wrench

    • Pry bar

    • (Optional) Ball joint separator

     

    Installation Steps:

     

    1. Preparation & Removal

    • Park on a level surface, engage parking brake, and chock the rear wheels.

    • Loosen the lug nuts and front axle nut (while the vehicle is on the ground).

    • Lift the vehicle securely with a jack and support it with jack stands. Remove the wheel.

    ?

    2. Disassemble Suspension

    • Disconnect the tie rod end from the steering knuckle.

    • Disconnect the lower ball joint or control arm to allow the knuckle to swing free.

    • Remove the old axle nut and any retaining clips.

    ?

    3. Remove Old Axle

    • Carefully pry the outer CV joint out of the wheel hub.

    • Place a drain pan under the transmission. Use a pry bar to gently pop the inner joint from the transmission/differential. Avoid damaging the transmission seal.

    ?

    4. Compare & Install New Axle

    • Critical:? Compare the new axle with the old one to ensure identical length and spline count.

    • Inner Joint:? Align the splines and push the new axle into the transmission until you hear/feel the circlip snap into place. Gently tug to confirm it is locked.

    • Outer Joint:? Slide the axle through the hub assembly.

    ?

    5. Reassembly

    • Reconnect the ball joint and tie rod to the knuckle. Tighten fasteners to manufacturer spec.

    • Install a new axle nut? and hand-tighten (do not fully torque yet).

    • Reinstall the wheel and lower the vehicle to the ground.

    ?

    6. Final Torque

    • With the vehicle’s weight on the ground, use a torque wrench to tighten the axle nut to the factory-specified torque.

    • Re-torque the lug nuts in a star pattern.

    ?

    7. Post-Installation Check

    • Check transmission fluid level and top off if necessary.

    • Perform a short test drive. Listen for clicks on turns (indicating improper seating) and check for vibration.


    Item Specifics
    Brand AM-Mortors2020
    Manufacturer Part Number AM182733CN
    Interchange Part Number NCV27092
    OE/OEM Part Number 31608643184, 31608680338
    Superseded Part Number BM8208
    California Prop 65 Warning Yes
    Fitment Type Direct Replacement
    Compatible Makes BMW
    Model X3, X4
    Year 2018-2023
    Engine L4 2.0L, L6 3.0L
    Placement on Vehicle Front Right
    Note It fits Automatic Transmission only, Not fits Manual Transmission
    ABS Ring Included No
    Quantity 1 items a lot
    Transmission Type GAS, Automatic Transmission
    Overall Compressed Length 34.49 IN
    Inboard Joint Type Male
    Shaft Material 40CR
    Items Included N/A
    Inboard Spline Quantity 27
    Input Shaft Connection Style Spline
    Outboard Spline Quantity 37
    Output Shaft Connection Style Spline
    Materiall Rubber, Stee
    Axle Boot Material Neoprene
    Surface Finish Black Coating
    Boot Color Black
    Cotter Pin Included No
    Package Included (Front Right Side, Front Passenger Side) CV Axle Shaft Assembly
    Spindle Nut Included Yes
    Axle Nut Locking Type Split Pin
    Grease Type Molybdenum Disulfide Lithium Grease
    CV Shaft Assembly Working Principle Connect the wheel, axle to the gearbox cv joints shift torque at a controlled speed to the wheels the up and down motions of the suspension system.
    CV Axle Shaft Assembly Style Factory
    Performance Part Yes
    Universal Fitment Yes
    Vintage Part Yes
    OE Spec or Performance/Custom Performance/Custom
    Features OE-Certified,?DOT-Certified Factory?CV?Axle?Shaft?Assembly,?SAE-Certified
    Hardware Included No
    Hazardous Material No
    Fitment（Notes) Verify this part fits your vehicle using the compatibility chart

    Shipping

    1. Package handling takes about 1 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.

    2.We use USPS First Class Package service.
    3.International Buyers Please Note:
    a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
    b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.

    Payment

    Payment by eBay approved method

     

    Returns
    • We offer a 30 day 100% money back guarantee.
    •  
    Feedback

    1. We will leave positive feedback once we get your payment. 
    2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
    3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR

    Contact Us

    Any question, please contact us.

    Front Right Passenger CV Axle Shaft Assembly For BMW X3 2018-2023 X4 2019-2022

    CV Axle Installation Guide (Generic Steps)

     

    ?? Important Safety Notice:

     

    • Professional Recommendation:? CV axle replacement involves heavy components and precise torque specifications. We strongly recommend this job be performed by a qualified mechanic with proper tools (jack stands, torque wrench, etc.).

     

    • Check Fitment:? Verify this axle matches your vehicle’s Make, Model, Year, and Drivetrain (FWD/RWD/AWD) before starting.

     

    • Refer to your vehicle’s service manual for exact steps and torque values.

    ?

    ?

     

    Tools Needed:

     

    • Floor jack & Jack stands

    • Wheel chocks

    • Socket set & Breaker bar

    • Torque wrench

    • Pry bar

    • (Optional) Ball joint separator

     

    Installation Steps:

     

    1. Preparation & Removal

    • Park on a level surface, engage parking brake, and chock the rear wheels.

    • Loosen the lug nuts and front axle nut (while the vehicle is on the ground).

    • Lift the vehicle securely with a jack and support it with jack stands. Remove the wheel.

    ?

    2. Disassemble Suspension

    • Disconnect the tie rod end from the steering knuckle.

    • Disconnect the lower ball joint or control arm to allow the knuckle to swing free.

    • Remove the old axle nut and any retaining clips.

    ?

    3. Remove Old Axle

    • Carefully pry the outer CV joint out of the wheel hub.

    • Place a drain pan under the transmission. Use a pry bar to gently pop the inner joint from the transmission/differential. Avoid damaging the transmission seal.

    ?

    4. Compare & Install New Axle

    • Critical:? Compare the new axle with the old one to ensure identical length and spline count.

    • Inner Joint:? Align the splines and push the new axle into the transmission until you hear/feel the circlip snap into place. Gently tug to confirm it is locked.

    • Outer Joint:? Slide the axle through the hub assembly.

    ?

    5. Reassembly

    • Reconnect the ball joint and tie rod to the knuckle. Tighten fasteners to manufacturer spec.

    • Install a new axle nut? and hand-tighten (do not fully torque yet).

    • Reinstall the wheel and lower the vehicle to the ground.

    ?

    6. Final Torque

    • With the vehicle’s weight on the ground, use a torque wrench to tighten the axle nut to the factory-specified torque.

    • Re-torque the lug nuts in a star pattern.

    ?

    7. Post-Installation Check

    • Check transmission fluid level and top off if necessary.

    • Perform a short test drive. Listen for clicks on turns (indicating improper seating) and check for vibration.



    1. Package handling takes about 1 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.

    2.We use USPS First Class Package service.
    3.International Buyers Please Note:
    a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
    b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.

    Payment by eBay approved method

     

    • We offer a 30 day 100% money back guarantee.
    •  

    1. We will leave positive feedback once we get your payment. 
    2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
    3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR

    Any question, please contact us.


    Copyright of am-motors2020. All rights reserved.