AUDISON APS 8D + RECOMMENDED, COMPACT SIZES MDF BOX = BRAND NEW, SEALED MDF SUBWOOFER 250W RMS WITH FACTORY MESH-GRILE

THIS IS 2x 4Ohm SUB, SO IT'S WIRED IN PARALLEL FOR 1x 2Ohm

BOX  IS MADE OF 0.7"/18 mm MDF, WITH VERY GOOD QUALITY BLACK CAR CARPET AND FILLED WITH ACOUSTIC WOOL IN 25% VOLUME FOR SOFTER, DEEPER BASS.

ALL DIMENSIONS OF BOX ARE IN THE 3rd PICTURE IN GALLERY, BOX IS PROJECTED AND PERFORMED ACCORDING TO TS PARAMETERS VOLUME: 8L.

You simply won’t find a better performing woofer in its price class! 

The APS 8 D is designed to deliver maximum performance in a sealed enclosure with ultra-compact volumes from 7.5 lt. to 8.5 lt. It features push connectors for ease of wiring and configurations and has been developed with a primary goal: to deliver high output in tight spaces. Output is a matter of excursion; the more air the cone moves, the more output. However reduced mounting depth traditionally has meant low excursion. Prima subwoofers employ a special cone-dustcap-basket geometry which guarantees large excursion of the mobile group, while keeping the mounting depth to a minimum. The surround and spider have been carefully designed to prevent the “rocking-mode” phenomenon. The cooling circuit has been designed with air vents on the basket underneath the spider, eliminating the need for vents on the bottom-plate. This allows the subwoofer to be mounted close to the back wall of the enclosure, making the most of the reduced mounting depth.


APS 8 D ADVANTAGES:

1 Ultra-low profile (3.11 in. / 79 mm) for maximum installation flexibility.

2 Special designed cone-dustcap-basket geometry which guarantees a long linear excursion capability (almost 9 mm, one-way) while keeping the mounting depth to minimum.

3 Air vents on the basket underneath the spider, eliminating the need for the central pole vent allowing mounting close to rear wall of enclosure.

4 Massive motor assembly optimized with FEM (Finite Element Modeling) for perfect control under high excursion conditions.

5 Water-repellent pressed paper 8 in. cone featuring a profile developed with FEM simulation and optimized with the Klippel Scan Vibrometer.

6. Steel mesh grille and plastic gasket included.

SPECIFICATIONS:

Maximum Peak Power 500 W

Continuous Power Handling (RMS) 250 W
Recommended Amplifier Power (RMS) 100-250 W
Nominal Impedance (Znom) 2x 4Ω

Free Air Resonance (Fs) 30 Hz

Linear Excursion (Xmax) 16,5mm (0.65")
Efficiency (1 W / 1 m) 84.dB SPL
Net Weight 6.7 lb / 3,04 kg 

Magnet High density flux ferrite
Cone Water-repellent pressed paper
Subwoofer Voice Coil Ø mm (in.) 40 (1.57)

INCLUDES:

- SEALED MDF BOX, DAMPED WITH ACOUSTIC WOOL, WIRED INSIDE AND READY TO PLAY

- AUDISON APS 8 D SUBWOOFER

- MANUAL

- 1 YEAR WARRANTY