3D effect that can bring the look of the room to the next level.

Peel and Stick self adhesive tiles are easy to use and easy to re-size to fit any corner. The material is PE Foam which is easy to cut to size needed

• The Best Value at the Lowest Price - 3D wallpaper tiles are 5.6 square feet each.
• 3D Effect - Each white brick wallpaper is NOT flat, but it has 3D texture for the look of real brick.
• Easy to Use - Simply peel off the paper on the back and stick to the area where you want to apply
• Size for Each Piece: about 5.6 square feet (70 cm x 77 cm) (30 in x 27 in) 6mm thick.
• Material: PE Foam (for indoor use only)

• 8 Pack cover about 44.8 Square Feet
• 12 Pack cover about 67.2 Square Feet
• 20 Pack cover about 112 Square Feet

1. Measure the area of the wall for installation to decide on the total quantity of wallpaper panels needed as well as on which way you want them installed;
2. Removing all the dust from the wall by vacuuming and wiping and wait for the wall to dry prior to installation;
3. Cut the wallpaper panels to the desired size; you may need to cut and piece together for certain spaces where a whole panel does not fit;
4. When cutting the panels you may need to measure and mark where you want to cut and then place a long ruler along the line in order to make a straight cut;
5. As to the space between two panels it is best to maintain the same space throughout the wall; it is generally recommended to trim the side of one or both panels in order to get a uniform space;
6. Gently remove the backing paper to expose the adhesive and affix them to the wall; you need to align the panels first before gently pressing down to make them stick to the wall;