KILLARK/ HUBBELL 

MODEL NO. UGFI20C2 

ACCEPTOR SERIES 

GFCI BLADED RECEPTACLE 

!NEW IN BOX!

*PLEASE READ CAREFULLY*

KILLARK/ HUBBELL 

MODEL NO. UGFI20C2 

ACCEPTOR SERIES 

GFCI BLADED RECEPTACLE 

!NEW IN BOX!

KILLARK/ HUBBELL 

MODEL NO. UGFI20C2

STRAIGHT BLADE ADAPTOR RECEPTACLE

ACCEPTOR SERIES 

HARD-WIRED GFCI PROTECTED UNIT RECEPTACLE

3/4" FEED THROUGH

125 VOLTS

20 AMPS

FEATURES & SPECIFICATIONS

"The ACCEPTOR® UGP/UGR Plug and Receptacle system, with its unique, patented design, is interchangeable with other NEMA bladed type explosion-proof and dust ignition proof devices. The series has been tested and classified for use with Crouse-Hinds® Ark-Gard®2 and Appleton® U-Line® plugs and receptacles in hazardous locations."

"ACCEPTOR receptacles contain an integral switch which must be closed to energize the circuit. The design permits only an approved plug to be energized. To actuate the switch, the plug must be inserted and rotated clockwise approximately 45°. The plug will lock into this position preventing accidental disengagement. To remove, simply push in then turn the plug counterclockwise and pull straight out. Plugs and receptacles may be used where interchangeable bladed devices are needed in locations made hazardous by the presence of flammable gases or vapors, combustible dusts or easily ignitable fibers and flyings. Plug can serve to provide power for portable equipment used in both hazardous and non-hazardous areas."

Applications • Petroleum Refineries, Chemical Plants • Wet/Damp/Corrosive Areas • Grain Elevators/Feed Mills 

Features 

"• All external hardware is 316 stainless steel to provide low maintenance and long life • Factory sealed chamber in UGR receptacle contains switch’s arcing components • No additional external seals are required, except in Group B applications • Receptacles are U.L. Listed as raintight. Proper sealing against moisture is assured • Spring loaded receptacle cover closes when plug is removed to provide protection when not in use • Copper-free aluminum (less than 4/10 of 1%) alloy resists corrosion • Electrostatically applied and baked powder epoxy/polyester finish."

ITEM IS FACTORY NEW IN BOX

QTY.  x1 EACH 

Payment

Our preferred payment method is PayPal; however, you can contact us if you would like to pay via credit card. Payment is due within 7 Days. All Louisiana residents will be required to pay the 4% state sales tax.

Shipping

We ship exclusively to valid USA addresses via UPS. Buyer is responsible for calculated shipping as well as an additional $3.50 shipping and handling charge. Combined shipping is offered upon request and all items must be paid for on a single invoice. Contact us if you would like to pickup locally.

Return Policy

Returns will only be accepted if the item was misrepresented or damaged during shipping at no expense to the buyer.

PLEASE ASK ALL QUESTIONS BEFORE BIDDING

We do our best to accurately describe the items we sell; however, we are not experts on everything sold.

If our description is unclear or is missing information, please contact us so that we can resolve the issue.

No warranties expressed or implied.