A jetted tub will lose heat much more rapidly than a standard bath tub will. This usually requires adding additional hot water in an effort to maintain the warm comfort level of the water. A bath heater solves this problem by automatically maintaining the water temperature in the comfortable range of around 102° to 104°.  

 This T-Style jetted bath heater easily installs on the discharge side of most common pumps. The pump fitting and jet return fittings are designed to work with industry standard pumps and plumbing.

 A 36" cord with a standard Nema, 3 prong grounded plug is included.

 

Dimensions

 

Electrical: 12.5 Amps, 120 Volts, 50/60 Hz 1500 Watts, 5118 BTU

Cord: 36 Inch, with 3 prong grounded Nema plug

Plumbing: Pump union is standard 1-1/2" buttress threads (Threads actually measure about 2-7/16" diameter)

Jet returns are 1" slip fittings                      

For use with 1" inside diameter PVC pipe (1" PVC pipe measures about 1-5/16" outside)

 

Included Items

This unit includes all the items needed to install it in either 1-1/2", 1", or 3/4" plumbing.

2: Union ends for 1-1/2" pipe

2: Union ends for 1" pipe

2: Union ends for 3/4"pipe

2: Union gaskets

1: 8 Foot roll of #8 AWG bonding wire

1: 3 Foot grounded cord - already installed

 

 Product Features

Smart Thermostat – Insures heating element operates only when the water temperature drops below 102.5° F. Provides constant, comfortable water temperature.

Certified Real Heat™ Technology – 100% efficient element to water heat transfer. No wasted energy consumption.

Stainless Steel heater housing - Corrosion resistant heater housing

Intelligent High Limit Switch – The ultimate safety switch, it matches an auto-reset high limit with an additional manual reset switch. If the high limit switch is ever activated due to extreme temperature, the Intelligent High Limit switch can be manually reset assuring you continued safety.

Heater “On” Light – Provides a visual indicator that the heater is operating and raising the temperature of the water.

 

100% Quality Assurance – Every component and every complete heater assembly is put through a battery of pre and post production quality tests for guaranteed reliability.

Made in America – Manufactured in Corona, California by a dedicated group of quality minded men and women.