Polishing compound Red Rouge Large bar - a premium grade compound formulated to give high luster finish for Jewelry Polishing - especially to Yellow Gold. This is the most popular compound used by Jewelry manufacturers.   

Compound is for use with a polishing motor, applying the compound onto the rotating buff on the motor.  The friction heat created by the motor rotation will dress the buff edge surface. Compound can also be used on Brass and Copper with excellent results, will also work with other soft non ferrous metals.

JETS Product # 1614-103   Made in USA

Weight 1.4 to 1.5 Lbs. Bar  (+/-}

Sale is for 1 BAR > 6" x 2" x 1-3/4"

NOTE: Visit  JETS INC. ebay Store Listings, where you can see the full range of  Polishing Compounds, Buffing Wheels, Spindles and Arbors and many more Jewelers Equipment Tools & Supplies.  JETS Inc.

1113 CKSP FRE 1.2 M

POLISHING RECOMMENDATIONS:

Our recommendations and suggestions on Buffing to obtain the best results possible: 

·  Use the right compound for the metal that you are trying to polish 

·  For best results it may be needed to go through 2 or 3 steps, in polishing to get the optimum   

          finish you are looking to achieve.

·  Make sure that the parts that are being polished are smooth and clean, use the

         appropriate abrasive to remove lines and scratches.

·  Avoid using different compounds with the same buff, if you do make sure to clean 

         Remove any compound residue on the surface edge with buff rake.

·  Segregate your buffs for the various metals, Gold, Silver, Brass … try not to use the

         same buff for all metals. If you do make sure buffs are cleaned (dressed) with rake.

·  A clean buffing wheel edge is important.

·  Allow the buff and compound to perform the work they were made and formulated for, excessive force or pressure will hurt the process

WORK SAFE!   Working with rotary motors and wheels can be dangerous if proper safety procedures are not followed.