Describe:
- The PoE Ethernet extender can transmit Ethernet signal and power through one single network cable, which solve the transmission distance limitation of devices as for network camera and so on. The product can extend to 120M and thus the cascading distance can up to 400m after be cascaded for several times. And it can support 100Mbps full duplex transmission mode with good protection ability of anti-ESD and anti-surge. The special design of built-in splicing slot on both sides and magnetic attraction as well as hanger on the bottom enables multiple installation methods of wall mounting, splicing and adsorption. Above all, the product can give a better systematic solution of transmission distance and power supplying for network camera and other device.
Features:
- Comply with IEEE 802.af Power over Ethernet.
- 10/100M Supported.
- Extender the range of PoE an additional 120 meters.
- Automatically detects and protects PoE equipments from being damaged by incorrect installation.
- Plug-and Play no configuration required.
- 1 Port PoE extender can forward both Ethernet and PoE power for 1 terminal equipment via Cat5 UTP cable.
Product Reviews:
- 1-Port PoE Extender has 2 10/100M Lan ports,among them,one for power input,the other for power output. Comply with 10/100BASE-TX,IEEE 802.3 af-PoE.
- Power input for single port is 13W. Power output for single port is 12.2W
Applicable Range:
- Used with AP,IP camera,IP telephone and the other network equipments in the situation of the lack of power line or far away from the power outlets
- Installed at hotels,schools,buildings,villages,etc.
Other Specifications:
- PoE input: 1 RJ45 port
- PoE output: 1 RJ45 port
- Network Medium: Cat5 or better UTP cables (less than 120m)
- Repeater Mode: Store and forward
- MAC Address Table: 2K
- Packet Buffer Memory: 48 Byte
- Switching Capacity: 400Mbps
- PoE Standard: IEEE 802.3af
- Input power: 13 Watts
- Output power: 12.2 Watts
- Power Supply Type: 1/2+,3/6-,Mode A,End-Span
- Network Protocol: IEEE 802.3i-10BASE-T, IEEE 802.3u: 100BASE-TX, IEEE 802.3x-Flow Control, IEEE 802.3af-Power over Ethernet;
- Regulation Compliance: FCC Part 15B, ROHS Directive 2011/65/EU,Low Voltage Directive 2014/35/EU,EMC Directive 2004/108/EC;
- Working Temperature: 0°C~40°C
- Working Humidity: 10%~90%,No Condensation
- Storage Temperature: -30°C~70°C
- Storage Humidity: 5%~90%, No Condensation;
- Dimension: 75x37x26.5mm / 2.95'' x 1.46'' x 1.04''
- Weight: 60g
Notes:
- Please don't place any heavy thing on the PoE extender;
- To prevent the water seeping into the extender,please keep PoE extender away wet environment;
- Suggest to use PoE extender indoors.When installing the extender in outdoor,please install it in a waterproof place.
Package Include:
- 1 x 1-Port PoE Extender