| Note: You are paying for an overhaul and high flow service for two Rb26dett GTR Turbochargers. | |
| Service information: | |
| Applied model: | RB26dett R33 R32 GTR / Stagea T25 turbochargers |
| Power rating: | 500HP as twin |
| Compressor Specifications: | Upsized compressor wheel with factory comp housing machined out. |
| Turbine housing specifications: | Upsized steel turbine wheel with factory turbine housing machined out. |
| Waste gate: | Internal waste gate upsized with flapper valve upgrade. |
| Bearing type: | Bush bearing |
|
Warranty: We back our work with 12 Month unlimited KM warranty. Warranty voids if failure caused from installation faults, Oil starvation or object damages. |
|
|
Service
instructions: Once purchase is made. Turbocharger has to be either dropped off in person or delivered to our Po.Box. Turn around time is roughly 5 working days depending on the amount of work required. We can supply exchange units if required, there will be a cost of a bond. Braided oil feeding line might be required as if factory bearing housings needs to be replaced, we can have those supplied at additional costs. In some cases the turbocharger might not be suitable for rebuilding, or if housings are cracked or damaged. You will be informed about it before services taken place. |
|
|
Service
information: Factory turbocharger will be stripped, both compressor and turbine housings machined to suit a brand new core. Internal gate flapper valve is upgraded with gate up sized. All engineering work are carried out in Australia by qualified Australian engineers. This is an Stage 1 high flow, happy working at factory boost level, tune and fuel system. High flowed turbo maintains factory drive ability with a lot more power throughout the rev range. Braided oil line is supplied with this service, factory water lines, oil drain, cold and hot side plumbing fits high flowed turbocharger. I've personally owned few Rb26 GTRs and currently an R34GTR. I been modifying them for many year with current Rb26dett project on going. I do have a fair knowledge in them, do feel free to drop in an email for any service related information. Dyno reading attached shown a R33GTR with: |
|