2 Gold Strap Locks
Round Flat Head
To suit Electric / Acoustic Guitar and Bass
Installation:
Release the fastening nut from the straplock, screw in the pin on the guitar
Make sure the pin is tightened, then lock the strap to the straplock button
Insert the fastening nut into the straplock
Specifications:
Material: Alloy with chrome plating
Colour:Gold (also available in Silver and Black
Item length: 5cm/ 1.97inch
Package included:
2 x Guitar strap lock
FITTING GUIDE
Look at the first picture on the advertisement showing the
2 strap locks.
STEP 1. Looking at the right-hand strap
lock, place your thumb on top of the knurled nut and two fingers around the lip
on the lower part of the strap lock and squeeze them together(as per pictures 6
& 7). You can then pull on the screw to remove it and the pin section the
screw goes through. Unscrew the knurled
nut and remove the top plate. You should now have the four pieces separated as
shown in picture 2 from left to right. We will call them items 1 to 4.
STEP 2 Unscrew your existing strap
pin on your guitar and replace it by
screwing in the new strap pin (item 4) shown on the right in picture 2.
STEP 3 Take hold of item 2 and push
it through the hole in the .strap (as per picture 3), then putting the wide
side of it over the other side of the
strap and picking up the knurled nut (item 1) screw in and tighten the nut(as
per Picture 4).
STEP 4 Using STEP 1, namely squeeze
the two parts together and place it firmly over the new pin you have just fitted
on the guitar and release. Your strap lock should now be in place holding the
strap to the guitar. Repeat the process for
fitting the second strap lock.