The DM-CBL-ULTRA-PC is a shielded CAT6a patch cable designed for use with all Crestron® DigitalMedia 8G+® (DM 8G+®) products, as well as HDBaseT® and 10GBase-T Ethernet. Using the DM-CBL-ULTRA-PC in combination with other Crestron DM® Ultra structured cabling products ensures the highest performance and reliability for distributing Ethernet data and uncompressed 4K/60 video.

The DM-CBL-ULTRA-PC is the ultimate Category 6A patch cable. Its innovative PCB-based plug design optimizes signal tuning for exceptional transmission. Advanced contact technology provides decreased variability and greater reliability over traditional crimp-type plugs. Category 7 S/FTP stranded cable is used to enable optimal transmission performance while eliminating alien crosstalk. Every DM Ultra patch cable is 100% factory tested to ensure full performance and compliance.

 
Key Features
  • Fully-shielded CAT6a patch cable
  • Unique PCB-based RJ45 plug design
  • 360 degree shield coverage
  • Low-profile, snag-resistant boot design
  • Robust strain and bend relief
  • Cantilevered latch for enhanced accessibility
  • High-performance CAT7 S/FTP stranded cable
  • Alien crosstalk preventive construction
  • Ultimate performance for 10GBase-T Ethernet, HDBaseT®, and Crestron® DM 8G+®
  • Sold in eight lengths from 1.5 to 50 ft (0.45 to 15 m)
  • 100% factory tested
Electrical
 CompatibilityCAT5e, CAT6, CAT6a
 Contact Resistance10 mΩ
 Input to Output Resistance200 mΩ
 Insulation Resistance500 mΩ
 Dielectric Withstand Voltage1000 Volts DC or AC peak minimum contact to contact
 Current Rating1.5 Amps
 PoE CompatibilityIEEE 802.3at PoE & PoE+
 Surface Transfer Impedance<10 mΩ/m @ 10 MHz
Mechanical – Plug
 Jack CompatibilityRJ45
 Insertion Cycles2500 minimum
 Retention Force50 N minimum
 Tensile Strength20 lb minimum cable to plug
Mechanical – Cable
 ConstructionS/FTP
 Wiring StandardsTIA/EIA T568A & T568B
 Conductors26 AWG (0.14 mm²) 7x32 stranded tinned copper
 Jacket TypeCM, LSZH
 Jacket ColorBlue
 Overall Outer Diameter0.25 in (6.35 mm) nominal
 Bend Radius2 in (50 mm)
Mechanical – General
 Plug Housing MaterialPolycarbonate
 Contact Materials50 microinches gold plating or equivalent
 Plastic MaterialsFlame retardant thermoplastic
 Flammability RatingUL 94V-0
 Green FeaturesRoHS, lead-free, halogen-free, PVC free
 Shielding360 degree coverage
Environmental
 Temperature14° to 140°F (-10° to 60°C)
Compliance
 ANSI/TIA-568-C.2, ISO/IEC 11801 Ed 2.2, IEEE 802.3an, IEEE 802.3af, IEEE 802.3at, ANSI/TIA 1096-A, IEC 60603-7-51, UL 1863 and CSA-C22.2 No. 182.4-M90, IEC 60332-1, IEC 60754, IEC 61034, Anatel Resolution No.242,2000