New RV LED Awning Light Set

Over 16 Feet of super bright white LED Lights to light up your RV.

This is a bright white LED Light Strip 16' that is fully Waterproof.  These lights are meant to last and does not need to be taken on and off or plugged and unplugged every time you open and close your awning. 

The 10 key RF remote uses Radio Frequency so your receiver can be placed behind walls, cupboards, storage bins and more.  This is great since you won't need to have a line of site to your receiver when controlling the light strip.  

This kit is specifically designed for recreational vehicles.   The strip is held in place by it's adhesive backing.

What's included in this kit:

• 1 16' Pc. of  Waterproof LED strip light w/Wire lead. 
• 10 key RF remote with dimmer and flashing modes 
• 1 x 12v power cord/plug
  

How to install

• This strip can be mounted in many places; best place for mounting the LED Awning light is just under the Awning lip that is fastened to sidewall of your RV.  This will allow the LED awning light to be hidden and protected with the awning when closed and revealed when the awning is in the open position. This is the most permanent, safest and easiest place to mount the awning light. When locating the light on the sidewall side of the unit it produces much better light and will not shine in your eyes while sitting under your awning.
• Select the location where you want to mount the light, take in account how you want to get the 12 volt power to this strip. We suggest starting the wire end of the strip near your RV power source.
• Clean the mounting surface with 3M adhesive promoter if possible, if not just use rubbing alchohol. Remove the 3M backer and install end to end along the awning extrusion. Please be careful and plan ahead, this channel will not come off once it has been applied.
• Remove the 3M backer from the LED strip, then apply.
• Connect the Strip light wire lead to any 12V or 110v  switched source and enjoy your new LED Awning light for 50,000 plus hours.
• Note: This is very easy for any DIY to do.