NEW Multi-layer metal compression reduction / cylinder head gasket VR6 NEW
Turbo cylinder head gasket Multilayer metal (Multi Layer Steel) This special cylinder head gasket (complete solution) for turbo conversions includes a coated intermediate plate or Compression reduction already integrated in the cylinder head gasket!
Manufacturer: WP special parts / Reinz Overall strength: 3.6mm Engine code: AAA, ABV, AES
The new compression ratio is: 8.5:1 (Series 10:1)
Metal seals are characterized by a very long service life.
incl. HuhLoosen to adjust the chain tensioner.
Save the purchase of 2 head gaskets and an intermediate plate.
The intermediate plate is reusable.
Attention only for VR6 with turbo or compressor!
When converting to turbo or The compression of the compressor must be reduced, which can be done using special pistons or an intermediate plate. This means that significantly higher boost pressures and outputs can be achieved. The original pistons would not be able to withstand the resulting temperatures under normal compression conditions under "forced ventilation".
Made in Germany
You can get the seals from us following Strengths and compression ratios.
Compression ratio 11:1 - 0.6mm eBay number 200418057940
Compression ratio 10.5:1 -1.1mm eBay number 192750861035 Compression ratio 10:1 - 1.6mm Ebay number 200501581923Compression ratio 9.6:1 - 2.1mm eBay number 190811526416 Compression ratio 9.2:1 - 2.6mm Ebay number 200906372655Compression ratio 8.8:1 - 3.1mm Ebay number 190390606746Compression ratio 8.5:1 - 3.6mm Ebay number 190425267071Compression ratio 7.9:1 - 4.6mm Ebay number 200482228372Compression ratio 7.6:1 - 5.2mm Ebay number 191411009186
|