JEWELERS WHITE POLISHING COMPOUND - FRENCH DIALUX BLANC 
SILVER POLISHING - FOR WHITE METALS
.
4 BARS - POLISHING COMPOUND FOR POLISHING WHITE METALS

 

Dialux® Blanc White Polishing compounds a premium compound for white metals. Dialux White is formulated especially for Silversmiths and Goldsmiths to polish SILVER. The Dialux White is widely used by  Metalsmiths for a High Polish Finish. Use a small amount of this compound on a Muslin - Finex - White Buff, make sure buff edge is clean for best results. "A-1 TOP QUALITY PRODUCT"

Used for Bright Polish on White Metals - Gold - Silver - Platinum

    NOTE: We have included polishing recommendations at the bottom of this page, to assist you.

Bar size: 4" x 1" x 1-1/8"  - 100mm x 25mm x 30mm

Bar Weight: 120 Grams - 4 Oz.

Bars are individually wrapped like Chocolates (In this case like White Chocolates).

 

·        Utilizes Graded Abrasives,

·        Blended with Additives

·        Long Lasting Composition with Minimum Usage

·        Good Adhesion to Buffing Wheels

·        Produces -  High Shine

         SALE IS FOR 4 BARS

JETS Product # 1614-930 x4    Made by Lippert/Unipol

NOTE: Visit  JETS INC for TOOLS & SUPPLIES our ebay Store to see the COMPLETE LINE of the PREMIUM Dialux® Polishing Compounds, along with Buffing Wheels and more polishing supplies and material along with a selection of many more Jewelers Equipment Tools & Supplies. JETS Inc.

1.3 FE   1016   CKSP M P

POLISHING RECOMMENDATIONS:
Our recommendations and suggestions on Buffing to obtain the best results possible:  
·        Use the right compound for the metal that you are trying to polish
·        It may be needed to go through 2 or 3 steps, in polishing to get the optimum result you are looking to achieve.
·        Make sure that the parts that are being polished are smooth and clean, use the appropriate abrasive to remove lines and scratches.
·       Avoid using different compounds with the same buff, if you have to then make sure to clean and remove any hardened compound residue on the surface edge with a buff rake.
·        Segregate your buffs for the various metals, Gold, Silver, Brass … try not to use the same buff for all metals.  If you have to then make sure buffs are cleaned (dressed) with a buff rake.
·        A clean buffing wheel edge is important.
·        Allow the buff and compound to perform the work they were made and formulated for, excessive force or pressure will hurt the process.     
·        Whenever you are working with Platinum never use a buff that was used for another type of metal.
WORK SAFE!   Working with rotary motors and wheels can be dangerous if proper safety procedures are not followed.  PROTECTION - Protect yourself, your fingers and hands, your face and eyes and use respirators.