Aussie Traveller Curved Roof Rafters CRR-2 Mini
Did you know awning damage is the most common type of insurance claim within the RV industry? Curved Roof Rafters were introduced to help overcome these two common problems experienced by caravanners with roll out awnings:
1. Wind Flapping. Wind flapping in the awning causes the caravan to shake which can lead to restless sleep plus cause damage to the awning, frameset, roller and fabric.
2. Water Pooling. Water pooling is a common cause of awning damage.
The Aussie Traveller CRR-2 Roof Rafter Mini is widely regarded as the best quality caravan roof rafter available.
Suitable for most caravan and RV roll out awnings including Carefree & Dometic A&E, the ATRV Curved Roof Rafter CRR-2 is used to keep the vinyl roof from sagging, ensuring 100% water run-off as well as keeping the fabric tight and reducing wind flap.
The CRR-2 has a curvature of 95-98mm (when fully extended), larger than the standard universal rafters which are around 50-60mm.
Recommended Usage
The minimum recommended usage per awning size is outlined in the following table:
| Awning Size | Recommended |
| 11' and under | 1 |
| 12' - 16' | 2 |
| 17' - 20' | 3 |
| 21' and over | 4 |
Specifications include:
- 1.4 to 2.5m extension
- 95-98mm curve will keep a good amount of tension on the awning fabric
- Curved top edges to protect awning fabric
- 12 Month Warranty through Aussie Traveller
- Wall brackets included
- Lightweight and durable aluminium
- Powder coated white
Installation Details:
- Attach the bracket to the RV with 2 screws into the desired position
- Extend the awning out to the fully opened position making sure the key way is facing down
- Drill a hole in the awning tube at an appropriate height
- File / de-burr the hole in the barrel to ensure no damage to the fabric occurs when closing
Installation is simple but we have included more detailed instructions inside the packaging with photos & diagrams.
Our Comments:
- We recommend the Aussie Traveller CRR-2 (Mini) over the CRR-1 (Maxi). The CRR-1 has a larger curvature of 123-125mm which is generally more than what is needed & can cause stretching of the awning fabric.
- This rafter is not suitable for Box Awnings such as Fiamma. Please see our separately listed Fiamma Awning Rafters.