*** 4 Cards Side By Side with no dividers Card Display Case with Black Steel Screws. Can be used with horizontal or vertical cards up to 180pt.
*** Available in Red, White, Blue, Black, Green, Yellow and Orange.
*** Please leave a note in the notes section at Paypal checkout with your color selections !!!
*** New barrel and screw system so NO cracking the acrylic when screwing together.
*** These cases are made from 2 pcs. of Clear acrylic and 1 pc of 3/16" Colored acrylic. CASES WILL NOT HOLD CARDS THICKER THEN 3/16" (180pt or less)
*** Inside cut out measurements are 3-1/2" x 10"
*** Outside case measurements are 4-1/2" x 11"
*** Corners are drilled out so your cards DO NOT get damaged !!!
*** Also these are made from acrylic so down the road if you scratch them you can use a 3M compound and polish the scratches right out. (try this with one of those cheap plastic cases YEA Right)
*** All holders are delivered with protective film on cases that will have to be peeled off. 
*** You are only bidding on the case NOT the cards pictured. 
*** Make sure to tell your local card shops about these listings =}