May you Like
ANDELI 160A MIG Welder Gasless Synergic Inverter Lift-TIG/Stick Welding Machine
DESCRIPTION
This is a high-performance DIGI Synergic multi-process welder that supports gasless MIG, Lift-TIG and MMA welding and it is easy to operate. The gasless MIG mode has adjustable inductance control, voltage regulation and 2T/4T functions, and can intelligently recommend the appropriate welding material thickness according to the set welding current, so it is very suitable for garage, farm, mobile technicians, DIY and other repair services, especially for welding beginners. The whole machine adopts a compact and modern design with a large-size LED color front control panel.
FEATURES
- Gasless Synergic MIG/Manual MIG/Lift TIG/ MMA(ARC/STICK) 4 welding modes
- DIGI Synergic System control: the current, voltage and feeding speed can be synchronously changing to correctly get matching each other so very easy to use.
- Full protections: over current protection, over heat protection and over load protection
- Gasless MIG Welding - Uses self-shielded flux-cored wire, so no gas is required
- Variable Voltage Control (Range: 0 to 4V)- Gives precise adjustment of output voltage to give control of heat input
- Variable Inductance Control (Range: -9.9 to +9.9)- Gives arc transfer adjustment to improve weld quality and significantly reduce spatter
- 2T and 4T are available on MIG welding mode
- Welding thickness display- Automatically indicates the recommended welding thickness based on the set welding current.
- Wire diameter size range: 0.8/0.9/1.0(mm)
- Fitted feed roller size: 0.8/1.0(mm)
- Wire reel size can be up to 1kg
- Soft start - When MIG welding wire only feeds slowly until the welding arc has been established
- Comes with a 2m 14AK MIG torch
- Dinse Plug Size: 10-25
- TIG arc start method: Lift (Please note the TIG function is lift arc start, not High Frequency ignition arc start)
- AUTO ARC FORCE, HOT START and No stick technology
- MIG welding thickness range: 0.7 to 4.2mm
- TiG welding thickness range: 0.5 to 3.0mm
- Stick welding thickness range: 1.3 to 7.5mm
- Usable electrode 1.6 - 3.2mm for MMA welding
- IGBT technology inverter - more efficient and easier to use than a transformer or MOSFET
- Large LED digital display
- CE approved
- Comes with a 3 pin 13amp UK standard plug
- Compact portable design and light weight
- Provides very smooth low splatter welds on all steels due to its inverter technology
- This machine is not suitable for welding aluminium and aluminium alloys
SPECIFICATION
| Brand | ANDELI |
| Power Supply | AC220V+/-15% Single phase (50-60Hz) |
| Rated Input Capacity(KVA) | 6.4 at MIG, 4.6 at Lift TIG, 7.5 at MMA |
| No-load Voltage (V) | 56+/-5 |
| Welding Current Range (A) | 30 - 160 |
| Rated Duty Cycle (25C °) | 60% |
| Wire Reel Size (KG) | 0 to 1kg |
| Welding wire size range | 0.8/0.9/1.0 (mm) |
| Fitted feed roller size | 0.8/1.0 (mm) |
| Inductance control range | -9.9 to +9.9 |
| Transistor Technology | IGBT |
| Machine system | DIGI synergic system |
| Welding Process | SYN MIG/MAN MIG/LIFT TIG/MMA |
| TIG arc start method | Lift |
| ARC FORCE/HOT START | AUTO |
| Anti-stick | Yes |
| Gasless | Yes |
| Efficiency | 80% |
| Insulation Class | F |
| Protection Class | IP21S |
| Net Weight (kg) | 3.8 |
| Measurements (mm) | 330 x 150 x 238 |
PACKAGE CONTENT
ANDELI MIG-160LED DC inverter Welder, 2m 14AK MIG Torch, 2m Earth Lead, 2m MMA Lead, Instruction manual, Wire Brush, Welding face mask.
