Hydrogen Peroxide in its pure form it is a colourless liquid, slightly more viscous than water; however, for safety reasons it is normally used as an aqueous solution. Hydrogen Peroxide can be used for water desinfection as well as bleaching of hair, pulp/paper and other materials. Hydrogen peroxide solutions look like water and can be dissolved in water unrestrainedly. At high concentrations these solutions give off an irritating, acidic smell. Hydrogen peroxide is inflammable. At low temperatures it becomes solid. Hydrogen peroxide is used for different applications, because it is very selective. By changing the reaction conditions (temperature, pH, dose, reaction time and the addition of a catalyser), hydrogen peroxide will attack different pollutions.

Results of these test strips are shown in parts per million (ppm) of Hydrogen Peroxide (H₂O₂).

• Test uses HRP enzyme with TMB which forms blue in the presence of peroxide
• Simple Dip-Wait-Read Testing Method
• Ideal for on-site water testing
• Test strips are stored in a plastic container with a detailed colour chart to protect them
• Ideal for quick and reliable test of water
• No MSDS required
• Accurate results are achieved in under one minute

These strips provide accurate, immediate results at an affordable cost.

Suitable for: fresh water samples, including water from taps, wells, springs, boreholes, ponds, as well as rain water

Contains: 50 test strips

Testing Levels: 0.5, 2, 5, 10, 25, 50, 100 ppm (mg/l)

Total Test Time: approx. 35 seconds

How to Use:

1. Dip one strip into a water sample for 2 seconds.
2. Remove and wait 30 seconds then match to the colour chart.

Interferences: other oxidising agents, such as free chlorine, similar colour developments may occur