Vw Bora Polo 1.6 16V Lupo Gti Compression Reduction Cylinder Head Gasket

The description of this item has been automatically translated. If you have any questions, please feel free to contact us.


Cylinder head gasket with compression ratio 10.4:1

WP special parts logo

NEW compression reduction "Lupo GTI" NEW

Metal cylinder head gasket & compression reduction

This is a special cylinder head gasket only for higher-performance engines.

An intermediate plate was replaced by a stronger, sanded and coated intermediate plate.

The compression reduction is already integrated into the seal!

Engine code: BAD, ATN, AUS, AZD, AJV, ARC, AVY, BCB, AUV

Manufacturer : WP special parts / Reinz

Seal thickness: NEW 1.6mm (Normal 0.6mm)

The new compression ratio: 10.37:1 (basic compression previously 11.5:1)

Multi-layer metal seals (Multi Layer Steel) are characterized by a very long service life.

From us you can get the seals in the following thicknesses and compression ratios.

Compression ratio11.5:1 with seal thickness 0.6mmeBay number202018614839
Compression ratio10.37:1 with seal thickness 1.6mmeBay number201325794859
Compression ratio9.89:1 with seal thickness 2.1mmeBay number192274486519
Compression ratio9.46:1 with seal thickness 2.6mmeBay number191553462150
Compression ratio9.06:1 with seal thickness 3.1mmeBay number191680345229
Compression ratio8.71:1 with seal thickness 3.6mmeBay number192274486539
Compression ratio8.08:1 with seal thickness 4.6mmeBay number202018614830

Attention only for performance increases or for planned cylinder head compensation!

When tuning measures on the turbo or Compressor engines should have their compression reduced; this can be done using special pistons or an intermediate plate.

This means that significantly higher boost pressures and outputs can be achieved.

The original pistons cannot withstand the resulting temperatures under normal compression conditions during "forced ventilation" or Do not drive at the knock limit with this seal.

Of course, other strengths are also possible on request.

Made in Germany.

The overview shown here shows which models or Motors the intermediate plate offered can also be installed:

MANUFACTURERMODELTYPEKWBJ-FROMBJ-BIS
AUDIA2 (8Z0)1.6 FSI8102/200008/2005
VWBORA (1J2)1.6 16V7710/199805/2005
VWBORA station wagon (1J6)1.6 16V7705/199905/2005
VWLUPO (6X1, 6E1)1.6 GTI9209/199807/2005
VWPOLO (6N2)1.6 16V GTI9210/199909/2001
SEATLEON (1M1)1.6 16V7709/2000-----------
SEATTOLEDO II (1M2)1.6 16V7709/200005/2006

Comparable to OE numbers

VW036 103 383 AB
VW036 103 383 AN
SEAT036 103 383 AB
SEAT036 103 383 AN
SKODA036 103 383 AB
SKODA036 103 383 AN

Comparable to manufacturer numbers

AJUSA10152900
CORTECO414140P
ELRING476.412
ELWIS ROYAL0056056
SPESSO21600/6700
GOETZE30-029466-00
PAYAC5280
REINZ60-34260-00


dewabit

  • Condition: New metal cylinder head gasket with integrated compression reduction "Lupo GTI" by WP special parts / Elring / Reinz
  • Specification: sealing strength 1.6mm (normal 0.6mm); new compression ratio 10.37 (basic before 11.5)
  • Material: Multi-layer metal (Multi Layer Steel) MLS cylinder head gasket; Made in Germany
  • Design: stronger, ground and coated intermediate plate replaces original; compression reduction already integrated in the seal
  • Compatibility: Audi A2 (8Z0) 1.6 FSI; VW Bora (1J2) 1.6 16V; Bora station wagon (1J6) 1.6 16V; VW Lupo (6x1, 6e1) 1.6 GTI; VW Polo (6N2) 1.6 16V GTI; Seat Leon (1M1) 1.6 16V; Seat Toledo II (1M2) 1.6 16V
  • Motor codes: Bad, Atn, from, AZD, AJV, ARC, Avy, BCB, AUV
  • Comparable OE and ref numbers: VW 036 103 383; Ajusa 10152900; Corteco 414140p; Elring 476.412; Elwis Royal 0056056; Chip 21600/6700; Goetze 30-029466-00; Payen AC5280; Pure 60-34260-00