This thermometer kit can be used for monitoring the temperature in stove pipes, chimneys, and outdoor wood boilers. This thermometer reads a thermocouple probe, shows the temperature on its red LED display, and makes a buzzing sound when temperature rises above the pre-set alarm temperature. For stove pipes and chimneys, probes can be attached to the chimneys or the surface of stoves. For wood boilers, the probe can be attached to the hot water line to monitor the temperature of the water. 

Note: The AT200 meter is a single channel meter. It can only read one temp sensor (thermocouple) at one time. 
 
What is included in the kit: 
 
• One thermometer
• One temperature probe
• One flashing buzzer or one piezo buzzer, with 6 ft buzzer cable. 
• One 12Vdc power adapter
 Thermometer with Power supply, Buzzer
 
Thermometer:
The thermometer accepts one type K thermocouple probe and show the temperature on its red LED display window. The temperature unit can be set to either Celsius or Fahrenheit. The thermometer has a built-in alarm buzzer and a port for an optional external buzzer. These two buzzers are synchronized. Two temperature alarms can be set on the thermometer: one alarm can be set as the high limit alarm and the other can be set as the low limit/low fuel alarm. Once the alarm is triggered, both the internal and the external buzzers will go off. The gauge is powered by 12V DC through an AC adapter (included) for continuous operation. It can also be powered by a 12V car battery. The cable length for power adapter is 3 ft.

Probe: 
Two probe options are available:
1). The washer sensor (TC-K-WS) is suitable for single wall pipes. It can be mounted on the surface of the pipe or stove with a #10 screw. Maximum temperature 1650ºF.
2). The 4" (100 mm) probe (TC-K-BR) with mounting bracket can be used on double wall pipes. User needs to drill a 1/8" hole to insert the probe. Maximum temperature 1650ºF.

Washer Sensor for Single Wall (TC-K-WS)Sensor with Bracket for Double Wall (TC-K-BR)
 
Probe Specifications:

 

Washer Sensor

(TC-K-WS)

Double Wall Sensor

(TC-K-BR)

Temperature Range

1650ºF (900ºC)

1650ºF (900ºC)

Accuracy

+/-5ºF

Cable Insulation

Fiberglass with stainless steel over braid.

Cable Working Temperature

900ºF

Cable Length

6 ft (2 m), 16 ft (5 m), or 33 ft (10 m)



Buzzer:
The external buzzer can be placed in a room that is different from where the stove is located. Two buzzer options are provided:
1). Panel mount flashing buzzer (FLBuz-12). It will flash red light with buzzing sound.
2). Wall mount Piezo buzzer (PZBuz). It can be screw-mounted or stuck to the wall. The piezo buzzer gives no light, but it has a very loud buzzing sound (about the same level as the smoke alarm). Please pay attention to the polarity of the Piezo Buzzer. If connected incorrectly, this buzzer won't work.
The cable length of the external flashing buzzer is 6 ft. It can be extended to more than 100 ft with two conductor cable. The cable length of the piezo buzzer is 6 ft. It can also be extended by two conductor cable.

FLBuz-12Piezo buzzer

 Internal BuzzerFlashing Buzzer
(FLBuz-12)
Piezo Buzzer 
(PZBuz)
Alarming MethodSoundSound & flashing LightSound
Decibel Rating
(tested 10 cm away)
85 dB85 dB88 dB
Cable LengthNA6 ft6 ft
  
Warranty
One (1) year for the thermometer, three (3) months for the sensor.

Click here for common errors.

*Shipping note for international/non-US customers: The default international shipping method for this listing is FedEx or DHL. Estimate delivery time is about one week. Please provide your physical address and correct contact information for the package delivery (physical address is needed). For customers in remote/rural area, to avoid remote area delivery surcharge, we will ship your order out by USPS instead automatically (US postal service). It will be delivered about 1-2 weeks to Canada, 3-4 weeks to other countries. For special inquiry regarding our international shipping, please contact us.