.

GREY STAR POLISHING COMPOUND STAINLESS STEEL

GRAYSTAR BUFFING for HARD METAL COMPOUND

1.2LB BAR - METAL BUFFING - POLISH MATERIAL

Grey Star Polishing Compound is a polishing compound that has been widely used by Jewelers for lapping and polishing.  This polishing compound is used to polish Hard metals especially Stainless Steel, polishes metals to cut and bring out the color of the material.

The Gray Star compound works well on Precious and Ferrous metals has an excellent capacity to bring out good color of all metals. A BIG plus on this formulation is that it’s a Water Soluble Compound.

Polishing Compounds used in  lapping application are used with buffs and felt wheels.  The Graystar has a medium grade composition with fine and uniform abrasives that provide its cutting ability. 

It is an exceptional buffing compound material for polishing a wide range of metals, in particular for use on white and harder metals. Works well on Precious metals as well as Non-Precious:  Platinum, Stainless Steel, and Palladium polishing.  

NOTE: We have included polishing recommendations at the bottom of this page, to assist you.

GREY STAR COMPOUND  JETS Product #1614-702    Made in USA

Bars Size: 6" x 2" x 1-1/4" - 150mm x 53mm x 32mm

Bar Weight:  Approximately 1.2 Lb. / 455gr +/-

·        Utilizes Quality Grade Abrasives

·        Combined with Additives

·        Long Lasting Composition with Minimum Usage

·        Good Adhesion to Buffing Wheels

·        Water Soluble

·        Minimal Residue

·        No Discoloration

·        Produces - High Shine

SALE IS FOR 1 BAR

NOTE: Visit  JETS INC  ebay Store Listings, where you can see the compounds for various Metals and Applications, Polishing Compounds, Felt and Muslin Buffs and Buffing Wheels and a selection of  Jewelers Equipments Tools & Supplies.  JETS Inc.

FRE 912 CKP M 

POLISHING RECOMMENDATIONS:

Our recommendations and suggestions on Buffing to obtain the best results possible: 

·        Use the right compound for the metal that you are trying to polish

·        It may be needed to go through 2 or 3 steps, in polishing to get the optimum result you are looking to achieve.

·        Make sure that the parts that are being polished are smooth and clean, use the appropriate abrasive to remove lines and scratches.

·       Avoid using different compounds with the same buff, if you have to then make sure to clean and remove any hardened compound residue on the surface edge with a buff rake.

·        Segregate your buffs for the various metals, Gold, Silver, Brass … try not to use the same buff for all metals.  If you have to then make sure buffs are cleaned (dressed) with a buff rake.

·        A clean buffing wheel edge is important.

·        Allow the buff and compound to perform the work they were made and formulated for, excessive force or pressure will hurt the process.     

·        Whenever you are working with Platinum never use a buff that was used for another type of metal.

WORK SAFE!   Working with rotary motors and wheels can be dangerous if proper safety procedures are not followed. 

PROTECTION - Protect yourself, your fingers and hands, your face and eyes and use respirators.