| Note: You are paying for an overhaul and high flow service for a Toyota CT15B Turbocharger. | |
| Service information: | |
| Applied model: | 1JZGTE-VVTI CT15B turbocharger from Toyota Chaser and later model Soarer |
| Power rating: | 450HP |
| Compressor Specifications: | Upsized compressor wheel with factory comp housing machined out. |
| Turbine housing specifications: | Upsized steel turbine wheel with factory turbine housing machined out. |
| Waste gate: | 18Psi actuator. Internal waste gate upsized with flapper valve upgrade. |
| Bearing type: | Ball bearing |
|
Warranty: We back our work with 12 Month unlimited KM warranty. Warranty voids if failure caused from installation faults, Oil starvation or object damages. |
|
|
Service
instructions: Once purchase is made. Turbocharger has to be either dropped off in person or delivered to our Po.Box. Turn around time is roughly 5 working days depending on the amount of work required. We can supply exchange units if required, there will be a cost of a bond. Braided oil line, water line banjo adapters, and oil drain adapter is supplied with this service. In some cases the turbocharger might not be suitable for rebuilding, or if housings are cracked or damaged. You will be informed about it before services taken place. |
|
|
Service
information: Factory turbocharger will be stripped, both compressor and turbine housings machined to suit a brand new core. This particular core has up sized steel wheels. Internal gate flapper valve is upgraded with gate up sized. All engineering work are carried out in Australia by qualified Australian engineers. This is an Stage 3 high flow, minimum boost pressure it will run is roughly 17psi depending on free flow the engine setup is. It supports up to 280rwkws on pump 98 fuel and 325rwkws E85. it requires working with programmable ecu and bigger aftermarket fuel system. Dyno reading attached shown a Toyota Chaser with:
|
|