Genuine OEM Mitsubishi Outlander CVT automatic transmission, suitable for selected 2017-2023 models fitted with 4J11 or 4B11 2.0 petrol engines, subject to exact vehicle specification.

Used imported transmission in good working condition. Please verify the gearbox code, OEM part number, engine code, VIN, connectors, 2WD/4WD configuration and model year before ordering.

We supply **genuine OEM, low-mileage used automatic and CVT transmissions** imported from Japan vehicles and imported in original factory condition.

Unless specifically stated otherwise, our transmissions are:

- Genuine OEM used units
- Low-mileage imported transmissions
- Removed from donor vehicles
- Not rebuilt
- Not refurbished
- Not internally dismantled
- Not modified
- Not remanufactured
- Supplied with only the components shown in the listing photographs

Normal cosmetic marks, oxidation, storage marks and signs of previous use should be expected on a genuine used transmission.

---

IMPORTANT COMPATIBILITY NOTICE

The buyer must confirm compatibility before ordering.

Please compare:

- Transmission / gearbox code
- OEM part number
- Vehicle VIN / chassis number
- Engine code
- Vehicle model and year
- 2WD / 4WD / AWD specification
- Electrical connectors
- TCM / ECU requirements
- Valve body / mechatronic specification
- Gear ratio where applicable

A matching vehicle model alone does **not guarantee direct compatibility**.

We strongly recommend sending us your **VIN/chassis number and original transmission code before purchase**.

---

MANDATORY INSTALLATION REQUIREMENTS

To remain eligible for our seller-provided transmission warranty, the following must be completed correctly and documented.

# 1. FILTER REPLACEMENT IS MANDATORY

Before operating the replacement transmission, the applicable:

- Automatic transmission filter
- CVT filter / strainer
- External filter where fitted

must be replaced.

The customer must keep proof of filter replacement.

Accepted evidence may include:

- Filter purchase invoice
- Workshop invoice
- Photograph of new filter
- Photograph during installation

# OIL PAN / SUMP MAY BE OPENED

The customer is permitted to remove the **oil pan/sump only** for:

- Filter replacement
- Cleaning
- Normal servicing
- Inspection

No other internal opening or dismantling is permitted.

---

2. CORRECT TRANSMISSION FLUID MUST BE USED

Only the **manufacturer-specified fluid for the exact transmission** must be used.

This is especially important for CVT transmissions.

The customer must provide:

- Fluid purchase invoice
- Fluid brand
- Fluid specification
- Quantity used

Examples may include:

- CVTF
- NS-2
- NS-3
- Toyota WS
- ATF
- SP-IV
- Other manufacturer-specified fluids

Using the wrong fluid can cause serious transmission damage.

---

3. TRANSMISSION FLUID LEVEL MUST BE CONFIRMED

The fluid level must be set according to the vehicle manufacturer's correct procedure.

Modern automatic and CVT transmissions may require:

- Correct fluid temperature
- Vehicle level
- Engine running
- Gear selector cycling
- Diagnostic temperature monitoring
- Correct fill / overflow procedure

The customer must provide confirmation that the fluid level was correctly set after installation.

---

4. PROGRAMMING / CALIBRATION / RELEARN

Modern automatic and CVT transmissions may require:

- TCM programming
- ECU / TCM coding
- CVT calibration
- Adaptation reset
- Shift relearn
- Clutch adaptation
- Valve-body calibration
- Transmission initialization
- Fluid deterioration counter reset
- Other manufacturer-required procedures

# EVIDENCE REQUIRED WITHIN 10 DAYS OF DELIVERY

The customer must provide all installation evidence **immediately after fitting and no later than 10 calendar days from the delivery date**.

We require:

- Professional installation invoice
- Transmission fluid invoice
- Fluid brand/specification
- Fluid quantity
- Fluid level confirmation
- Filter replacement proof
- Programming / reprogramming report
- Calibration / relearn / adaptation report where applicable
- Diagnostic evidence where applicable

These documents are required within 10 days so that the actual installation date and procedures can be verified.

Evidence supplied only after a fault develops may not reliably prove what was done at the original installation.

Failure to provide these documents within the required period may affect eligibility under our seller warranty.

---

# STRICT NO-REPAIR / NO-DISMANTLING POLICY

We do **not permit any internal repair, rebuilding, refurbishment, modification or dismantling of the supplied transmission** during the seller-warranty period without our prior written authorization.

If a problem occurs:

- Stop using the vehicle
- Contact us immediately
- Do not open the gearbox internally
- Do not repair the transmission
- Do not rebuild the transmission
- Do not replace internal parts
- Do not authorize a third-party internal repair

The only permitted opening is removal of the **oil pan/sump for filter replacement and normal servicing**.

Unauthorized internal repair or dismantling may prevent us from inspecting the transmission in the condition in which it was supplied and may affect the seller warranty.

---

# FAULT CODES ARE NOT PROOF OF INTERNAL TRANSMISSION FAILURE

We will **not accept a warranty claim based only on a single diagnostic code or dashboard warning**.

Transmission-related fault codes may also be caused by:

- Wiring loom defects
- Damaged connectors
- TCM faults
- ECU communication faults
- Low battery voltage
- Grounding issues
- External sensors
- Incorrect programming
- Incorrect calibration
- Incorrect relearn
- Incorrect fluid level
- Incorrect fluid specification
- Cooler contamination
- Blocked cooler lines
- Installation errors
- Uncompleted installation procedures
- Other vehicle-related faults

A fault code by itself does **not automatically prove that the supplied transmission is defective**.

---

# PROFESSIONAL DIAGNOSTIC REPORT REQUIRED

If a fault is reported, we require a **complete professional diagnostic report**.

Where applicable, the report should include:

- Full diagnostic scan
- All stored fault codes
- All pending fault codes
- Freeze-frame data
- TCM / ECU communication status
- Wiring and connector checks
- Battery and charging voltage
- Fluid level confirmation
- Fluid specification
- Programming / calibration confirmation
- Transmission temperature readings
- Live-data readings
- Technician's written diagnosis
- Clear explanation of why the fault is believed to be internal to the supplied transmission

---


Before dispatch, we keep available inspection and condition evidence for the supplied transmission where applicable.

This may include:

- Photographs
- Videos
- Identification details
- Condition checks
- Functional checks
- Testing records


---

# COOLER & COOLER LINES

The transmission cooler and cooler lines must be checked before installation.

Contaminated oil, clutch material, metal particles or debris from the old failed transmission can damage the replacement gearbox.

The cooler and cooler lines must be:

- Properly flushed
- Cleaned
- Replaced where necessary

Failure caused by contamination from the old transmission is not considered an internal defect of the replacement transmission.

---

# PROFESSIONAL INSTALLATION REQUIRED

Installation should be carried out by a competent professional workshop or transmission specialist.

We recommend keeping:

- Installation invoice
- Fluid invoice
- Filter invoice
- Diagnostic report
- Programming report
- Calibration/relearn report
- Installation photographs

---

# SELLER WARRANTY

Unless otherwise stated in the individual listing, the transmission is covered by our **30-day seller warranty on the main internal transmission assembly**.

The warranty period begins from the date of delivery.

The seller warranty does not automatically cover removable or ancillary components such as:

- Sensors
- Wiring
- External solenoids
- Mounts
- Brackets
- Oil cooler
- Pipes
- Electronic modules
- External switches
- Torque converter unless specifically covered
- Transfer case unless specifically listed

---

# WARRANTY CLAIM REQUIREMENTS

For any seller-warranty claim, we may request:

- VIN / chassis number
- Original transmission code
- Installation invoice
- Complete diagnostic scan
- Technician report
- Fluid invoice
- Fluid specification
- Fluid level confirmation
- Filter replacement proof
- Programming / calibration report
- Photographs
- Videos

The buyer must **contact us before any repair or internal dismantling**.

We may require return of the transmission for inspection before accepting a warranty claim.

---

# WARRANTY DOES NOT COVER DAMAGE CAUSED BY

The seller warranty does not cover damage resulting from:

- Incorrect installation
- Wrong transmission fluid
- Incorrect fluid level
- Failure to replace filter
- Contaminated cooler or cooler lines
- Failure to program or calibrate
- Incorrect TCM / ECU coding
- Wiring defects
- TCM defects
- Electrical faults
- Wrong transmission fitted
- External component failure
- Accident or impact damage
- Racing or motorsport use
- Unauthorized repair
- Unauthorized dismantling
- Modification or rebuilding

This seller warranty does not remove any statutory or eBay rights that cannot legally be excluded.

---

# IMPORTANT ? CONTACT US BEFORE ANY REPAIR

If you suspect a transmission fault:

1. Stop using the vehicle.
2. Contact us immediately.
3. Do not open or repair the transmission.
4. Provide a complete professional diagnostic report.
5. Provide the installation evidence already supplied within the 10-day period.
6. Return for inspection may be required.

We do not automatically accept responsibility for:

- Unauthorized repair bills
- Labor charges
- Recovery charges
- Diagnostic charges
- Replacement parts purchased without authorization
- Consequential expenses

---

# RETURNS ? INCORRECT ORDER / CHANGE OF MIND

Where permitted by applicable law and eBay policy:

- Return request should normally be made within **15 days**
- Buyer is responsible for checking compatibility
- A **25% restocking charge may apply where legally permitted**
- Transmission must be returned complete
- Transmission must be returned in the same condition supplied
- Transmission must not have been internally dismantled, repaired, modified or damaged

Applicable statutory rights and eBay buyer protections take precedence where required.

---

# FAULTY ITEM RETURNS

If the transmission is believed to be faulty:

- Contact us first
- Do not dismantle or repair
- Provide the complete diagnostic evidence
- Return for inspection may be required
- Refund, replacement or other resolution will be determined after inspection and according to applicable eBay policies and statutory rights

---

- Remote-area delivery may require confirmation
- Valid telephone number required for courier delivery
- International shipments may require ID or customs documentation
- Delivery times may vary due to customs clearance

---

# CUSTOMS / IMPORT CHARGES

Any destination-country:

- Customs duty
- Import VAT
- Brokerage fee
- Clearance charge
- Port fee
- Government charge

is the buyer's responsibility unless specifically stated otherwise.

---

# BEFORE ORDERING

Please provide:

**VIN / Chassis Number:**  
**Vehicle Model:**  
**Model Year:**  
**Engine Code:**  
**Original Transmission Code:**  
**Automatic / CVT:**  
**2WD / 4WD / AWD:**

We will assist with compatibility checking where possible, but final compatibility responsibility remains with the buyer and installer.

---

# FINAL IMPORTANT NOTICE

This transmission is supplied **dry / drained for transportation**.

Before operation:

- Correct transmission fluid must be used
- Correct fluid level must be confirmed
- Applicable filter must be replaced
- Cooler and cooler lines must be checked
- Required programming / recalibration / relearn must be completed
- All installation evidence must be submitted **within 10 days of delivery**

**Only the oil pan/sump may be opened for servicing and filter replacement.**

**No internal repair, rebuilding, refurbishment, modification or dismantling is permitted without our written authorization.**

**A fault code alone is not proof of internal gearbox failure. A complete professional diagnostic report is required for any warranty claim.**
Genuine OEM Mitsubishi Outlander CVT automatic transmission, suitable for selected 2017-2023 models fitted with 4J11 or 4B11 2.0 petrol engines, subject to exact vehicle specification. Used imported transmission in good working condition. Please verify the gearbox code, OEM part number, engine code, VIN, connectors, 2WD/4WD configuration and model year before ordering. We do **not permit any internal repair, rebuilding, refurbishment, modification or dismantling of the supplied transmission** during the seller-warranty period without our prior written authorization. Unauthorized internal repair or dismantling may prevent us from inspecting the transmission in the condition in which it was supplied and may affect the seller warranty. Unless otherwise stated in the individual listing, the tr