Mitsubishi Outlander 2.0 Automatic Transmission CVT 4J11 4B11 2017-2023

This product datasheet was originally written in English. Below you can find an automatic translation into Spanish. If you have any questions please contact us.


Original Mitsubishi Outlander. CVT automatic transmission, suitable for selected 2017-2023 models equipped with 4J11 or 4B11 2.0 Gasoline Engines, subject to the exact specifications of the vehicle.

Imported transmission used in good working condition. Please check the gearbox code, OEM part number, engine code, VIN, connectors, 2WD/4WD configuration and model year before placing the order.

We supply **original OEM, used low mileage** automatic and CVT transmissions imported from Japanese vehicles and imported in original factory condition.

Unless specifically stated otherwise, our transmissions are:

- Original OEM Used Units
- Imported low mileage transmissions
- Removed from donor vehicles.
- Unrebuilt
- Not refurbished
- Not internally dismantled
- Unmodified
- Not remanufactured
- Supplied only with the components shown in the listing photographs.

Normal cosmetic marks, oxidation, storage marks, and signs of previous use should be expected in a genuine used transmission.

---

IMPORTANT COMPATIBILITY NOTICE

Buyer must confirm compatibility before placing order.

Please compare:

- Transmission code/gearbox
- OEM Part Number
- Vehicle VIN/chassis number
- Engine code
- Model and year of vehicle.
- Specifications 2WD / 4WD / AWD
- Electrical connectors
- TCM / ECU requirements
- Valve body/mechatronic specification
- Transmission ratio when appropriate

A matching vehicle model on its own **does not guarantee direct compatibility**.

We strongly recommend sending us your **VIN/chassis number and original transmission code prior to purchase**.

---

MANDATORY INSTALLATION REQUIREMENTS

To remain eligible for our seller-provided transmission warranty, you must properly complete and document the following.

# 1. FILTER REPLACEMENT IS MANDATORY

Before operating the replacement transmission, the applicable:

- Automatic transmission filter
- CVT filter/strainer
- External filter where installed

must be replaced.

Customer must keep proof of filter change.

Accepted evidence may include:

- Filter purchase invoice.
- Workshop invoice
- New filter photograph.
- Photography during installation.

# OIL CRANKCASE/SUMP CAN BE OPENED

Customer may pick up **oil charter/jump only** for:

- Filter replacement
- Cleaning
- Normal service
- Inspection

No other internal opening or disassembly is allowed.

---

2. CORRECT TRANSMISSION FLUID MUST BE USED

Only **manufacturer specified fluid should be used for exact transmission**.

This is especially important for CVT transmissions.

Customer shall provide:

- Fluid purchase invoice
- Fluid brand
- Fluid specification
- Amount used

Examples may include:

- CVTF
-NS-2
-NS-3
- Toyota WS
- ATF
-SP-IV
- Other fluids specified by the manufacturer.

Using the wrong fluid can cause serious damage to the transmission.

---

3. TRANSMISSION FLUID LEVEL MUST BE CONFIRMED

The fluid level should be adjusted according to the correct procedure of the vehicle manufacturer.

Modern automatic and CVT transmissions may require:

- Correct fluid temperature
- Vehicle level
- Motor running
- Gear selector cycle
- Diagnostic temperature monitoring
- Correct filling/overflow procedure.

Customer must provide confirmation that the liquid level was set correctly after installation.

---

4. PROGRAMMING/CALIBRATION/RELEARNING

Modern automatic and CVT transmissions may require:

- MTC programming
- ECU/TCM encoding
- CVT calibration
- Adjustment restart
- Shift relearning
- Clutch adaptation
- Valve body calibration.
- Initialization of the transmission
- Fluid deterioration counter zeroing.
- Other procedures required by the manufacturer.

# TEST REQUIRED WITHIN 10 DAYS AFTER DELIVERY

Customer must provide all installation tests **immediately after installation and no later than 10 calendar days from delivery date**.

We require:

-Professional installation invoice.
- Transmission fluid bill.
- Fluid brand/specification
- Amount of fluid
- Liquid level confirmation
- Filter replacement test
- Scheduling/reprogramming report
- Calibration/relearning/adaptation report where appropriate
- Diagnostic evidence when appropriate.

These documents are required within 10 days so that the actual installation date and procedures can be verified.

Evidence provided only after a fault develops may not reliably demonstrate what was done in the original installation.

Failure to provide these documents within the required period may affect eligibility under our seller's warranty.

---

# STRICT NO REPAIR / NO DISASSEMBLY POLICY

**We do not allow any internal repair, rebuilding, refurbishment, modification or dismantling of the supplied transmission** during the seller's warranty period without our prior written permission.

If a problem occurs:

- Stop using the vehicle.
- Contact us immediately
- Do not open the gearbox internally
- Do not repair transmission.
- Do not rebuild the transmission.
- Do not replace internal parts
- Do not authorize a third-party internal repair

The only opening allowed is removal of the **oil sump/sump to replace the filter and perform normal maintenance**.

Unauthorized internal repair or dismantling may prevent us from inspecting the transmission in the condition it was supplied in and may affect the seller's warranty.

---

# FAILURE CODES ARE NOT INTERNAL TRANSMISSION FAILURE PROOF

**We will not accept a warranty claim based solely on a single diagnostic code or warning on the dash**.

Transmission-related fault codes can also be due to:

- Wiring defects
- Damaged connectors
- Failures of Traditional Chinese Medicine
- ECU communication failures.
- Low battery voltage
- Grounding problems
- External sensors
- Incorrect programming
- Incorrect calibration
- Incorrect relearning
- Incorrect liquid level
- Incorrect fluid specification
- Colder pollution
- Locked cooling lines
- Installation errors
- Incomplete installation procedures
- Other vehicle-related breakdowns

A fault code alone **does not automatically prove the supplied transmission faulty**.

---

# REQUIRES PROFESSIONAL DIAGNOSTIC REPORT

If a fault is reported, we require a **full professional diagnostic report**.

Where applicable, the report should include:

- Full diagnostic scan
- All fault codes stored
- All pending fault codes
- Frozen frame data
- TCM/ECU communication status
- Wiring and connector checks.
- Charging battery and voltage.
- Liquid level confirmation
- Fluid specification
- Programming/calibration confirmation
- Transmission temperature readings.
- Live data readings.
- Written diagnosis from technician.
- Clear explanation of why the fault is believed to be internal to the supplied transmission.

---


Prior to shipment, we keep available evidence of inspection and condition of the supplied transmission, where applicable.

This may include:

- Photographs
- Videos
- Identification data
- Condition checks
- Functional controls
- Test records


---

# COOLER AND COOLER LINES

The transmission cooler and cooler lines should be checked before installation.

Contaminated oil, clutch material, metal particles, or debris from the old broken transmission can damage the replacement gearbox.

The cooler, colder lines should be:

- Properly washed
- Cleaned
- Replaced when needed

Failure caused by contamination of the older transmission is not considered an internal defect of the replacement transmission.

---

# PROFESSIONAL INSTALLATION REQUIRED

Installation should be done by a competent professional workshop or transmission specialist.

We recommend maintaining:

- Installation invoice
- Smooth invoice
- Filter invoice
- Diagnostic report
- Scheduling report
- Calibration/relearning report
- Installation photographs.

---

# SELLER WARRANTY

Unless otherwise stated in the individual listing, the transmission is covered by our **30 day seller warranty on the main internal transmission assembly**.

The warranty period begins from the date of delivery.

Seller's warranty does not automatically cover removable or auxiliary components such as:

- Sensors
- Wiring
- External solenoids
- Frames
- Brackets
- Oil cooler
- Pipes
- Electronic modules
- External switches
- Torque converter unless specifically covered
- Transfer box unless specifically stated

---

# WARRANTY CLAIM REQUIREMENTS

For any seller warranty claims, we may request:

- VIN / chassis number
- Original transmission code
- Installation invoice
- Full diagnostic scan
- Technical Report
- Smooth invoice
- Fluid specification
- Liquid level confirmation
- Filter replacement test
- Programming/calibration report
- Photographs
- Videos

Buyer should **contact us prior to any internal repair or disassembly**.

We may request a return of the transmission for inspection before accepting a warranty claim.

---

# WARRANTY DOES NOT COVER DAMAGE CAUSED BY

Seller's warranty does not cover damage resulting from:

- Incorrect installation
- Incorrect transmission fluid
- Incorrect liquid level
- Do not replace the filter
- Contaminated cooler or cooler lines
- Failure to program or calibrate
- Incorrect TCM/ECU encoding
- Wiring defects
- Defects of Traditional Chinese Medicine
- Electrical failures
- Incorrect transmission installed
- External component failure
- Accident or impact damage
- Use in racing or motorsports
- Unauthorized repair
- Unauthorized disassembly
- Modification or reconstruction

This seller warranty does not remove any legal or eBay rights that cannot be legally excluded.

---

# IMPORTANT? CONTACT US BEFORE ANY REPAIR

If you suspect a transmission failure:

1. Stop using the vehicle.
2. Please contact us immediately.
3. Do not open or repair the transmission.
4. Provide a complete professional diagnostic report.
5. Provide proof of installation already supplied within 10 days period.
6. A return may be required for inspection.

We do not automatically accept responsibility for:

- Unauthorized repair invoices
- Labor expenses
- Recovery charges
- Diagnostic charges
- Replacement parts purchased without authorization.
- Consequent expenses

---

# Returns? WORRECT ORDER / CHANGE OF MIND

Where permitted by applicable law and eBay policy:

- Return request should normally be made within **15 days**
- Buyer is responsible for checking compatibility.
- A **25% replacement charge may apply when legally permitted**
- The transmission must be returned complete.
- The transmission must be returned in the same condition it was provided.
- The transmission must not have been disassembled, repaired, modified, or damaged internally.

Applicable legal rights and eBay buyer protections take precedence when necessary.

---

# RETURNS OF DEFECTIVE ITEMS

If the transmission is believed to be defective:

- Contact Us First
- Do not disassemble or repair
- Provide complete diagnostic evidence.
- Returns may be required for inspection
- Refund, replacement, or other resolution will be determined after inspection and in accordance with applicable eBay legal policies and rights.

---

- Delivery to remote areas may require confirmation
- A valid phone number is required for courier delivery
- International shipments may require identification or customs documentation.
- Delivery times may vary due to customs clearance.

---

# CUSTOMS / IMPORT CHARGES

Any destination country:

- Customs duties
- Import VAT
- Brokerage fees
- Settlement fee
- Port fee
- government office

It is the buyer's responsibility unless specifically stated otherwise.

---

# BEFORE ORDERING

Please provide:

**VIN/Chassis Number:**  
**Vehicle Model:**  
**Model Year:**  
**Engine Code:**  
**Original transmission code:**  
**Automatic/CVT:**  
**2WD / 4WD / AWD:**

We will assist with compatibility verification whenever possible, but the ultimate responsibility for compatibility lies with the buyer and installer.

---

# IMPORTANT FINAL NOTICE

This transmission is supplied **dry/drained for transport**.

Before operation:

- The correct transmission fluid should be used.
- Correct fluid level must be confirmed.
- The applicable filter should be replaced.
- Cooling and cooling lines should be checked.
- Required programming/recalibration/relearning must be completed
- All installation tests must be shipped **within 10 days of delivery**

**Oil crankcase/crankcase can only be opened for filter maintenance and replacement tasks.**

**No internal repair, rebuilding, remodeling, modification or dismantling is permitted without our written permission.**

**A fault code alone is not proof of an internal gearbox failure. A full professional diagnostic report is required for any warranty claims.**
Original Mitsubishi Outlander. CVT automatic transmission, suitable for select 2017-2023 models equipped with 4J11 or 4B11 2.0 gasoline engines, subject to exact vehicle specifications. Imported transmission used in good working condition. Please check gearbox code, OEM part number, engine code, VIN, connectors, 2WD/4WD configuration and model year before ordering. **We do not allow any internal repair, rebuilding, refurbishment, modification or dismantling of the supplied transmission** during the seller's warranty period without our prior written permission. Unless otherwise stated in the individual listing, the transmission is covered by our **sold warranty