Renault Arkana H5H470 1.3 TCe Turbo Petrol Engine 1332cc Genuine OEM
Complete Description:
Genuine OEM H5H470 1.3 TCe turbo petrol engine, supplied as a used imported engine in good condition. The H5H470 belongs to the Renault/Dacia H5H engine family and is a 1,332 cc (1.3L), 4-cylinder turbocharged petrol engine.
Engine Specifications
Engine code: H5H470
Displacement: 1,332 cc / 1.3L
Fuel type: Petrol
Cylinders: 4
Induction: Turbocharged
Injection: Direct-injection petrol engine family
OEM application: Renault / Dacia
Related engine family references: Nissan HR13DDT and Mercedes-Benz M282.914 are closely related applications, but they should not be treated as automatically interchangeable without checking the exact specification.
Compatibility / Applications
H5H470 applications include selected:
Renault Captur / Captur II
Renault Clio V
Renault Kadjar
Renault Megane IV
Renault Scenic IV / Grand Scenic IV
Renault Arkana
Renault Talisman
selected Dacia applications using the H5H470 engine family
Technical application data also shows H5H-family variants across selected Renault and Dacia models from roughly 2018 onward.
Important Compatibility Notice
Please do not purchase based only on vehicle model, engine size, or appearance. H5H-family engines were produced in several suffixes and power outputs, including H5H450, H5H470, H5H480, H5H490 and others. Engine management, turbo specification, ancillaries and other components may differ between variants.
Before ordering, please verify:
Exact engine code H5H470
VIN / chassis number
OEM part number
Model and production year
Power output
Turbo specification
Sensors and wiring connections
Sump and mounting configuration
Transmission compatibility
Emissions specification
The engine supplied will be the unit shown in the listing photographs. Any ancillary equipment shown should only be considered included where specifically stated in the listing.
Professional installation is strongly recommended. Correct fluids, timing-related service items, cooling-system checks, oil system priming and manufacturer-required programming or adaptation should be completed before operation.
Please contact us with your VIN and existing engine code before purchase if you require compatibility confirmation.
Best regards,
4x4 Experts
This listing is for a used genuine OEM petrol engine unless otherwise clearly stated. The engine is supplied in used condition and may show normal cosmetic wear, marks, staining, oxidation, or signs consistent with previous use.
COMPATIBILITY – BUYER RESPONSIBILITY
The buyer is fully responsible for confirming compatibility before purchase. Do not rely only on vehicle model, registration year, engine capacity, or appearance.
Before ordering, please verify:
Exact engine code
OEM / manufacturer part number
VIN / chassis number
Vehicle model and production year
Petrol engine specification and power output
Turbo / non-turbo specification
Emissions specification
Sump configuration
Engine mounts
Sensors and wiring connections
Intake and exhaust configuration
Transmission compatibility
ECU / immobiliser / programming requirements
If you are unsure, please contact us with the VIN and existing engine code before purchase.
ANCILLARIES
The sale covers the engine and only those components specifically stated as included in the listing.
Injectors, fuel rail, fuel pump, alternator, starter motor, air-conditioning compressor, turbocharger, wiring loom, sensors, manifolds, flywheel, clutch, brackets, pumps, and other ancillary components are not covered by the engine warranty unless specifically stated otherwise.
Any ancillary parts shown fitted in the photographs may be supplied only as convenience items and should not automatically be considered tested, warranted, or included unless the listing specifically confirms this.
MANDATORY PRE-INSTALLATION REQUIREMENTS
The engine must be installed by a competent professional workshop.
Before first start, the installer should inspect and, where applicable, replace or service:
Engine oil and oil filter
Air filter
Fuel filter
Spark plugs
Timing belt / timing chain and tensioner components where applicable
Auxiliary drive belt
Thermostat
Water pump where condition is uncertain
Oil strainer / pickup where accessible
Cooling system components
PCV / breather system
Intake system
Turbocharger oil supply and return system where fitted
The lubrication system must be primed correctly before first start.
COOLING SYSTEM
The complete cooling system must be checked before operation. The radiator, hoses, thermostat, water pump, expansion tank, cooling fan, and coolant circulation must be confirmed to be operating correctly.
Damage caused by overheating, low coolant, incorrect bleeding, blocked radiator, defective thermostat, cooling fan failure, or installation error is excluded from warranty.
FUEL SYSTEM
The buyer/installer must ensure the fuel system is clean and free from contamination.
Where applicable, inspect:
Fuel tank
Fuel lines
High-pressure fuel pump
Injectors
Fuel rail
Fuel pressure system
Damage caused by contaminated fuel, incorrect fuel, defective injectors, fuel pressure faults, or external fuel-system problems is excluded.
TURBOCHARGED PETROL ENGINES
For turbocharged engines, the turbocharger, oil feed, oil return, intercooler, intake pipes, and related systems must be checked and cleaned before first start.
The turbocharger must be correctly primed with oil.
Engine damage caused by turbocharger failure, blocked oil feed, oil starvation, foreign-object damage, contaminated intercooler, or boost-system faults is not considered an internal engine defect.
ECU / PROGRAMMING / ELECTRICAL SYSTEM
Some engines require ECU coding, immobiliser matching, adaptation, relearning, throttle calibration, injector coding, or other electronic procedures after installation.
Electrical faults, ECU faults, wiring faults, sensor faults, immobiliser faults, incorrect programming, or communication errors do not automatically indicate engine failure.
DIAGNOSTIC TROUBLE CODES
A diagnostic fault code alone is not accepted as proof that the supplied engine is defective.
A warranty claim may require:
Full diagnostic scan report
Compression test
Oil pressure test
Cooling system test
Installation invoice
Service receipts
Videos and photographs
Additional workshop evidence where reasonably required
WARRANTY
Unless otherwise stated in the listing, the warranty applies to the internal engine core only for the stated warranty period.
The warranty does not normally cover:
Ancillary components
Sensors
Injectors
Fuel pumps
Turbochargers
Alternators
Starter motors
Air-conditioning compressors
Wiring looms
ECU
Flywheel
Clutch
Mounts
Belts
Hoses
Filters
Thermostats
External pumps
Gaskets disturbed during installation
Labour costs
Recovery charges
Towing
Vehicle hire
Storage
Diagnostic charges
Loss of earnings
Consequential losses
This does not affect any rights that cannot legally be excluded.
WARRANTY EXCLUSIONS
Warranty may be refused where damage results from:
Incorrect installation
Incorrect engine supplied due to buyer compatibility error
Failure to replace required service items
Incorrect or insufficient engine oil
Oil starvation
Overheating
Cooling system failure
Incorrect coolant
Contaminated or incorrect fuel
External fuel-system failure
Turbocharger failure
Incorrect ECU programming
Wiring or sensor faults
Modified engine or vehicle
Racing or motorsport use
Excessive boost
Unauthorized internal repair
Dismantling without approval
Continued driving after abnormal noise, warning light, overheating, oil-pressure warning, smoke, or loss of power
CLAIM PROCEDURE
If a fault is suspected, stop using the vehicle immediately and contact us before carrying out internal repairs or dismantling.
The buyer may be required to provide:
Installation invoice
Vehicle VIN
Mileage
Diagnostic report
Fault codes
Photographs
Videos
Oil / service receipts
Compression or oil-pressure results
Other reasonable technical evidence
Do not dismantle or repair the internal engine without written authorization where a warranty claim is being made.
Where necessary, the engine may need to be returned for inspection before a final decision is made.
RETURNS – INCORRECT ORDER / CHANGE OF MIND
Where permitted by applicable law and marketplace rules, non-faulty returns may be accepted subject to the stated return period.
For mistaken orders or change-of-mind returns, the buyer may be responsible for:
Applicable restocking charge where legally permitted
The engine must be returned in the same condition supplied and must not have been modified, dismantled, damaged, or improperly installed.
FAULTY RETURNS
If the engine is confirmed to have a covered internal defect, the remedy will be handled in accordance with the listing terms, applicable eBay rules, and applicable consumer law.
A refund or replacement is not automatically issued solely because a buyer or workshop states that the engine is faulty. Reasonable diagnostic evidence and, where required, return inspection may be necessary.
The buyer is responsible for:
Import duty
VAT / sales tax
Customs charges
Clearance charges
Destination fees
Providing any documents requested by the carrier or customs authority
If a shipment is returned because the buyer refuses delivery, fails to clear customs, fails to provide requested documents, or fails to pay applicable import charges, reasonable outbound, return, customs, storage, and related costs may be deducted from any refund where permitted by law and marketplace rules.
Please contact us before purchase if you require clarification regarding compatibility, included components, condition, or installation requirements.
Best regards,
4x4 Experts