Nissan X Trail T31 2.5 Petrol 4WD Automatic Transmission.
Used Nissan X Trail 2.5 Gearbox Imported from Japan Automatic Rustless Low mileage checked and ready to install part in good working order at a reasonable price. Removed from 2010 low mileage vehicle.
We supply original used, low mileage automatic and CVT transmissions Vehicles imported from Japan and imported in their original condition.
Unless otherwise stated, our transmissions are:
Original Used OEM Units
Imported low mileage transmissions
Removed from donor vehicles
Unrebuilt
Unrefurbished
Not internally disassembled
Unmodified
Unrefurbished
Supplied only with components shown in list photographs
Normal cosmetic marks, oxidation, storage marks, and signs of previous use should be expected on an authentic used transmission.
Unless otherwise stated in the individual listing, the transmission is covered by our 30 Day Seller Warranty on Main Internal Transmission Assembly.
Warranty period starts from the date of delivery.
Seller warranty does not automatically cover removable components or accessories such as:
For any seller warranty claims, we may request:
Buyer must contact us via eBay messages before any internal repair or disassembly.
We may require transmission to be returned for inspection before accepting a warranty claim.
Seller warranty does not cover damage resulting from:
This seller warranty does not remove any statutory or eBay rights that cannot legally be excluded.
Buyer must confirm compatibility before ordering.
Please compare:
A matching vehicle model alone is enough does not guarantee direct compatibility.
We strongly recommend that you send us your Original VIN/Chassis Number and Transmission Code Before Purchase.
To remain eligible for our seller-provided transmission warranty, the following must be properly completed and documented.
Before using the replacement transmission, the applicable points:
needs to be replaced.
Customer must keep proof of filter replacement.
Accepted evidence may include:
Customer is authorized to pick up the oil pan/oil pan only for:
No other interior opening or disassembly is allowed.
Only the manufacturer specified fluid for exact transmission must be used.
This is especially important for CVT transmissions.
Customer must provide:
Examples may include:
"Using the wrong liquid can cause serious damage to the transmission."
The fluid level should be adjusted according to the correct procedure of the vehicle manufacturer.
Modern automatic and CVT transmissions may require:
Customer must provide confirmation that liquid level has been properly adjusted after installation.
Modern automatic and CVT transmissions may require:
Customer must provide all proof of installation immediately after assembly and no later than 10 calendar days from the date of delivery.
We need:
These documents are required within 10 days so that the actual installation date and procedures can be verified.
Evidence provided only after a defect occurred may not reliably prove what was done during the original installation.
Failure to provide these documents within the required timeframe may affect eligibility for our seller warranty.
Installation should be done by a competent professional workshop or transmission specialist.
We recommend keeping:
We make not allow any internal repair, reconstruction, refurbishment, modification or disassembly of the supplied transmission during the seller's warranty period without our prior written permission.
If a problem occurs:
The only opening allowed is the removal of the Oil pan/oil pan for filter replacement and normal maintenance.
Unauthorized internal repair or disassembly may prevent us from inspecting the transmission as it was supplied and may affect seller's warranty.
We will not accept a warranty claim based solely on a single diagnostic code or dashboard warning.
Transmission-related error codes can also be caused by:
A defect code in itself does not automatically prove that the supplied transmission is faulty.
If a defect is reported, we require a full professional diagnostic report.
If applicable, the report should include:
Prior to shipment, we keep proof of inspection and transmission condition provided, if any.
This may include:
Transmission cooler and cooling lines should be checked before installation.
Contaminated oil, clutch materials, metal particles, or debris from the old faulty transmission can damage the replacement gearbox.
Cooler and cooler lines should be:
A failure caused by contamination of the old transmission is not considered an internal defect of the replacement transmission.
If you suspect a transmission defect:
We do not automatically accept responsibility for:
Where permitted by applicable law and eBay policy:
Applicable statutory rights and eBay buyer protections prevail where necessary.
If the transmission is considered faulty:
Any destination country:
is the buyer's responsibility unless expressly stated otherwise.
Please provide:
VIN/Chassis Number:
Vehicle model:
Model Year:
Engine code:
Original transmission code:
Automatic / CVT:
2RM/4RM/TI:
We will help you check compatibility wherever possible, but the final responsibility for compatibility lies with the buyer and installer.
This transmission comes dry / drained for transport.
Before operation:
Only the oil pan/oil pan can be opened for filter maintenance and replacement.
No internal repair, rebuilding, refurbishing, altering or disassembling is permitted without our written permission.
A defect code alone is not evidence of an internal gearbox failure. A full professional diagnostic report is required for any warranty claims.
Please compare the part numbers, OE/OEM references, specifications and photographs in this listing with the component currently mounted on your vehicle before purchasing.
If an item is improperly ordered or returned due to a change of mind, return shipping and other return terms will be handled in accordance with the return policy stated on this eBay listing.
If the item is faulty, damaged, or materially different from the listing description, applicable eBay Returns and Buyer Protection rules will apply.
Professional installation is highly recommended. Installation must be done properly using the appropriate tools, equipment, and procedures.
Damage caused by improper installation, misuse, unauthorized modification, incomplete installation, or failure to follow the proper installation procedure may not be covered by the seller's warranty or return provisions, subject to buyer's statutory rights and applicable eBay protections.