Note: Adapters are not compatible with stock/original rims.

Suitable for which vehicle models?

For Acura
For 2001-2005 CL
For 2012-2019 ILX
For 1997-2001 Integra Type R Hatchback 3-Door
For 1991-2005 NSX (Rear Only)
For 2006-2019 RDX
For 1995-2004 RL
For 2002-2006 RSX
For 1999-2008 TL
For 2014-2019 TLX
For 2003-2014 TSX
For 1991-1995 Legend
For 2001-2006 MDX
For Chrysler
For 1996-2010 Sebring (Does not fit Convertible)
For 1999-2004 300M
For Dodge
For 1991-1996 Stealth
For 1995-2014 Avenger
For 2007-2012 Caliber
For 2001-2007 Caravan
For 1991-2007 Grand Caravan
For 1998-2004 Intrepid
For Ford
For 2006-2012 Fusion
For 2001-2012 Escape
For 1989-1997 Probe
For Eagle
For 1989-1999 Talon
For Honda
For 1998-2002 Accord (V6 Engine / 5-Lug Only)
For 2003-2019 Accord
For 2006-2014 Civic
For 2015-2019 Civic (EXCLUDES TYPE R)
For 1995-2019 CR-V
For 2010-2016 CR-Z
For 2003-2011 Element
For 2016-2017 HR-V
For 1995-2004 Odyssey
For 2003-2008 Pilot
For 1997-2002 Prelude
For 2000-2008 S2000 (Rear Only)
For Hyundai
For 2010-2019 Genesis Coupe
For 2009-2019 Genesis
For 2002-2009 Tiburon
For 2011-2019 Veloster
For 2001-2020 Santa Fe
For 2005-2020 Tucson
For Jeep
For 2007-2012 Compass
For 2007-2012 Jeep Patriot
For Kia
For 2007-2020 Optima
For 2008-2020 Soul
For 2010-2019 Sorento
For Mazda
For 2003-2019 3
For 2005-2015 5
For 2002-2018 6
For 1988-2002 626
For 2013-2019 CX-5
For 2007-2012 CX-7
For 2006-2015 MX-5
For 2006-2019 MX-5 Miata
For 2003-2012 RX-8
For 1994-2003 Millenia
For 1999-2004 Protege
For 2001-2003 Protege5
For Mitsubishi
For 1986-1989 Starion (Turbo Only)
For 1991-1999 3000gt
For 1989-2012 Eclipse
For 1999-2012 Galant
For 2003-2017 Lancer
For Scion
For 2011-2016 tC
For 2008-2016 xB
For Toyota
For 1995-2019 Avalon
For 1992-2019 Camry
For 1996-2011 RAV4
For 1991-2000 MR2
For 1980-1995 Pickup (2WD Only, ONLY fits 5-Lug)
For 1999-2008 Solara
For 1986-1998 Supra
For 1997-2004 Tacoma (2WD Only, Excludes Pre-runner)
For 2005-2008 Tacoma (ONLY fits 5-Lug)
For 2001-2012 Highlander
For 1991-1997 Previa
For 1998-2012 Sienna

SPECIFICATION:

Spacer Thickness:1 inch or 25 mm

Bolt Shack Length:34 mm

Torqued Down By Hand At:70-80 FT/LBS

Hub Bore:74 mm

Number of Pieces: 4

Position:
Front+Rear+Left+Right

NOTE：

1. Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide.
2. Measure the fender gap and stock bolt length to choose suitable thickness.(For 1 inch or less or special adapters, if the stock studs are longer than the adapters, and the wheels do not have hollow spot in them, you may need to grind, or cut your existing lugs if you don't choose to purchase shorter studs.)
3. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters, they are different. Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle.
4. Do not use impact wrench.Please use hand wrench. Recommended to use threadlocker.
5. Returns are only accepted if unused and not  installed.(returns are not accepted if spacers-adapters have been installed to your vehicle).

?

What are Wheel Spacers?

Also known as wheel adapters, wheel spacers are special components that help create extra wheel track width. They are fitted between the wheel hub assembly and the wheel itself to increase space. Every wheel gets displaced outward by a distance equal to the spacer’s thickness. 

As aforementioned, the primary purpose of wheel spacers is to increase space between the hub assembly and the wheel. It usually is not appropriate for the wheel to be very close to other inner parts like the wheel well. It will lower the driving performance, especially when the tyre rubs against the suspension components when making turns.

Wheel spacers are primarily used in vehicles with wider tyres during custom installation, where the tyres you are installing are larger than the tyres that came with the car. As a result, wheel spacers improve vehicle handling and provide better traction on the road.

STEPS TO PROPERLY INSTALL WHEEL SPACERS:

Step 1: Preparation

Step 2: Loosen All Lug Nuts

Step 3: Lift the Car

Step 4: Remove the Wheel

Step 5: Prepare the Wheel Hub

Step 6: Install the Wheel Spacer

Step 7: Torque the Matching Lug Nuts Tighten using the star pattern as shown below when following the numbers in order.

Step 8: Remount the Wheel

Step 9: Carefully Lower the Vehicle

Step 10: Torque the Lug Nuts to Specification

Step 11: Repeat Steps 1-10 for the Remaining Wheels