Product Description

CLEAR MOULD PROTECTIVE has been specially formulated for application to mould surfaces after their use to remove any surface moisture and to protect the mould against corrosion during storage. APPLICATIONS A clear - non-silicone protective coating for use on moulds and other metallic parts and components. The transparent dry film is non-staining and is highly recommended for use with white or clear polymers. The film will not harden or crack and is easily 'moulded-off' when recommencing production. Alternatively the film can be easily removed using Ambersil Mould Cleaner or Amberklene FE10 - ME20 or L030. Apply an even coating to all surfaces to be protected from 9 - 12 inches (25 -30cm). Ensure that the surfaces have cooled to below 35 degrees Celsius to ensure optimum film formation. ADVANTAGES Clear - Non-Staining Film : Will not mark or stain mouldingsHighly recommended for clear and white polymers Dry Film : Will not penetrate or creep into mould tool Film Allows Subsequent Handling : Resists Acid Finger Marking Resists Corrosion : The mould tool remains in top condition Easily Moulded Off : Ensures quick start up AREAS OF USE All injection mould tools - blow mould tools - extrusion dies and metal components requiring corrosion protection. TECHNICAL DATA Appearance : Clear - colourless liquid Protection against corrosion : TBA Water displacing : TBA Salt spray test : TBA Film forming properties : A continuous homogeneous film remains after 10 minutes Solubility : Soluble in solvents - insoluble in water Flammability : Classified as extremely flammable under Current EC Regulations Flash-point : Not applicable in sealed aerosol Packaging : 400 ml aerosol STORAGE The product may be stored at normal ambient temperatures and has a shelf life of not less than 72 months with correct storage. Aerosols should always be stored below 50OC - away from direct heat and naked flame.