Product Description

GREEN MOULD PROTECTIVE provides long term protection to mould tool surfaces after use. It removes any surface moisture and protects the mould tool against corrosion during storage.APPLICATIONSA coloured - non-silicone protective coating for use on mould tools. It incorporates a highly visible green tracer dye for easy visual identification;ensuring complete coverage and thus total protection. The viscous consistency prevents 'run-off' and inhibits creeping into the mould tool. The film resists the effects of high humidity. It will not harden or crack and is easily moulded off when recommencing production. Alternatively - it may be removed with Ambersil Mould Cleaner or any of the Amberklene Solvents.Apply a light - even coating to all surfaces from 9 - 12 inches (25-30cm). Ensure that the surfaces have cooled to below 35 degrees Celsius to ensure optimum film formation.ADVANTAGESViscous Protective Film : Will not penetrate or creep into the mould toolHighly Visible Film : Easy identification total coverage assuredResists Corrosion : The mould tool remains in top conditionEasily Moulded Off : Ensures quick start up Film Allows Subsequent Handling : Resists Acid Finger MarkingAREAS OF USEAll injection mould tools - blow mould tools - extrusion dies and metal components requiring corrosion protectionAppearance : Viscous - Green FilmProtection Against Corrosion : TBAWater Displacing : TBASalt Spray Test : TBAFilm Forming Properties : A continuous - homogeneous film remains after 10 minutesSolubility : Soluble in solvents insoluble in waterFlammability : Classified as extremely flammable under current EC RegulationsFlashpoint : Not applicable in sealed aerosolPackaging : 400 ml aerosolThe product may be stored at normal ambient temperatures and has a shelf life of not less than 72 months with correct storage. Aerosols should always be stored below 50OC - away from direct heat and naked flame.