SKF YAR 210-2RFGR/HV Y-Bearing Insert With Grub Screws 50mm Bore
Self-lubricating bearings, as the name suggests, provide their own lubrication during operation without requiring application of grease or oil lubricants.
Product Description
Self-lubricating bearings, as the name suggests, provide their own lubrication during operation without requiring application of grease or oil lubricants. Due to this, self-lubricating bearings are also referred to as maintenance-free or greaseless bearings as they require no relubrication or grease. Self-lubricating bearings work by having lubricant impregnated within the sliding layer of the bearing. This lubricant can either be liquid (oil) or solid (graphite, MoS2, lead) based on the requirements of the application (such as operating temperature). As the bearing operates, the lubricant is released through pores in the sliding layer, lubricating the bearing surface. The lubricant is uniformly dispersed throughout the sliding layer and thus there is no reduction in low friction bearing performance, even if the sliding layer becomes worn. A "running-in" surface is also usually included at the top of the sliding layer to provide low friction bearing performance at start up before the impregnated lubricant reaches the bearing surface.IndustriesAgricultureCementFans and BlowersFood and BeverageMaterial HandlingMedical and Health CarePackagingPaperPrintQuarrying, Mining and ConstructionTextile and LeatherUtilitiesBenefitsSimple cost effective bearing arrangement - units can be regressed.Can be used on fabricated and general engineering equipment.Secure shaft locking for all speed, load and vibration conditions.Effective sealing for all conditions and applications.Protects from the dangers of rotating shaft ends.SpecificationsDesign: Inner ring extended on both sides.Purpose specific: For food and beverage applications.Material: Stainless steel.Sealing solution: Multiple seals.Unit system: Metric.Bore diameter d: 50mm.Outside diameter D: 90mm.Overall bearing width B: 51.6mm.Width outer ring C: 22mm.Outer diameter inner ring d1: 62.51mm.Distance from locking device side face to thread centre B4: 9mm.Chamfer dimension r1,2min: 1mm.Distance from locking device side face to raceway centre s1: 32.6mm.Basic dynamic load rating C: 29.6kN.Basic static load rating C0: 23.2kN.Fatigue load limit Pu: 0.98kN.Limiting speed with shaft tolerance h6: 2200r/min.Calculation factor f0: 14..Thread grub screw G2: M10x1..Hexagonal key size for grub screw N: 5mm.Recommended tightening torque for grub screw: 16.5Nm.