Keda 1450KV Brushless Motor 2822

Clearing out some old stock.

These motors can only be mounted with the shaft sticking through a bulkhead, they can not have the shaft reversed.  Although they come with a spare shaft it does not have the groove in the right place to reverse the shaft.  So looking at the photos the part with the wires going in is mounted to a bulkhead and the rear of the motor rotates. This is the reverse of how a lot of motors come from the factory so make sure this will work for you.

These motors work well with a 7x5 prop and a 3S battery and a 30A ESC.  I have found them to be better than the really cheap motors from China.

28mm Diameter Body

26mm Body length

Shaft sticks out 13.5mm from the body.