All modifications must be installed by licensed mechanics and in compliance with your local modification regulations

​​​​​​​

Please Carefully check the Size of the Rods in Specific and Description

Application:

For BMW B38A15M0 / B38B15M0 1.5T 3 cylinder

Fitment Details:

75 kW (101 hp):
2015-on for BMW F45/F46 216i Active Tourer / Gran Tourer
2018-on for BMW F55/F56 for Mini One

80 kW (107 hp):
2015-on for BMW F20/F21 116i

100 kW (134 hp):
2015-on for BMW F20/F21 118i
2015-on for BMW F22/F23 218i coupe / convertible
2014-on for BMW F45/F46 218i Active Tourer / Gran Tourer
2015-on for BMW F30/F31 318i
2015-on for BMW F48 X1 sDrive18i
2014-on for BMW F55/F56 for Mini Cooper
2015-on for BMW F54 for Mini Clubman
2017-on for BMW F60 for Mini Countryman
2017-on for BMW F39 X2 sDrive18i
--
Pin Type: Floating Pin Piston

Specification:

TÜV PRODUCT TEST AND TÜV ISO 9001 CERTIFIED
Quantity: 3 Pieces a set as showing in picture
Bolts: Including ARP 2000 3/8" bolts (Note Extra cost for upgrading to ARP L19 bolts)
Material: Forged 4340 EN24 aircraft chrome moly quality steel for racing
Weight Tolerance: Balanced to +/- 1 gram in set
Warranty: 2 years warranty.

Dimensions:
Center to center length:148.2mm/5.835"
Big end diameter:48.6mm/1.913"
Small end diameter:22mm/0.866"
Big end width:24mm/0.945"
Small end width:21mm/0.827"

Feature

The density of titanium is significantly lower than that of steel, while maintaining considerable strength, which means that it is lighter than steel, but the strength is very similar.
1. Titanizing can further improve the bending strength of the product;
2. Titanizing will not affect the weight of the connecting rod;
3. Provide a wear-resistant layer, which greatly prolongs the service life of the parts;
4. TÜV PRODUCT TEST AND TÜV ISO 9001 CERTIFIED.
5. Material: Titanizing Forged SAE 4340 Chrome Moly Steel for the highest strength and durability, dedicated for Racing.
6. ARP 2000 bolts ,Optional ARP L19 fasteners available as an upgrade.
7. H-Beam design reduces weight without compromising strength.
8.Heat-treating & Shot-peened for remained consistent and strong, Shot-peened finish to remove potential for stress risers.
9.High precision CNC machined,Precision rod cap alignment dowels.
10.Bores finished to +/- .005mm.
11.Balanced to within +/- 1 g per rod.
12. Each rod is magnetic particle tested to ensure free of flaws.
13.Use X-rayed, sonic tested.
14.Custom Service.

Note:

* Professional installation is highly recommended (Instruction Included. (If not, we could offer you the E-book version. ))