Positek Limited P103.30AYL100 linear position sensor (LVIT inductive displacement transducer), pulled from service.

Markings read from the label on the body: P103.30AYL100, Serial Number 13693, Made in UK, ISO 9001 Approved. Connections are printed on the same label - Red = +5 Volts, White = Output 0.5 to 4.5 Volts, Black = 0 Volts, Screen = Case. The L100 suffix indicates a 100 mm measuring stroke in a 30 mm diameter stainless steel housing.

Condition: used. The gold label is scuffed, stained and partly torn, the stainless body has light scratches and some grease/dirt around the rod seal, and the cable end is cut and stripped with no connector fitted. The push rod is present and straight.

Sold as-is, untested - I have no way to power or verify this unit, so it is listed on its markings and appearance only. What you see in the photos is exactly what ships: the sensor with its attached cable, nothing else.

Condition

Used pull with cosmetic wear: the gold spec label is scuffed, stained and partly torn, and there is light scratching and some dirt/grease on the stainless body and around the rod seal. The lead wires are cut and stripped at the free end; no connector fitted.

Please note

• Spec label torn and stained
• Light scratches on stainless housing
• Dirt/grease residue around rod seal
• Cable end cut and stripped

What's included

• Attached flying-lead cable

Details

• Positek P103 series linear position sensor (LVIT, non-contact inductive)
• Supply +5 Volts (red lead)
• Analog output 0.5 to 4.5 Volts (white lead)
• 0 Volts common (black lead), screen to case
• 100 mm nominal measuring stroke per suffix L100
• 30 mm diameter stainless steel body
• Integral flying-lead cable with strain relief gland
• Made in UK, ISO 9001 approved
• Serial number 13693

You are buying exactly what is shown in the photos.