ABB DSQC611 Panel Board (panel/safety unit) used in ABB IRC5 robot controller cabinets.

Markings read directly off the board label: DSQC611 3HAC13389-2 /06 09622#3107610 1007-502-05. Board silkscreen also shows A-1007G and the manufacturer mark AROS ELECTRONICS AB.

Board comes complete on its galvanized sheet-metal carrier/shield with the pluggable terminal connectors at X21, X22 and X24 in place. Connector complement includes an RJ45 at X4, multiple keyed headers (X1, X3, X5, X6, X7, X8, X9, X10, X11, X12) and two on-board safety relays.

Condition: used pull, stored in an anti-static bag. No burnt, cracked or bulging components visible, no corrosion, no missing parts. Light handling marks on the metal only. It has not been tested or powered up, so it is sold as-is for repair, spare or rebuild use.

What you see in the photos is what ships: the DSQC611 board on its bracket with the plug-in terminal blocks shown.

Condition

Used pull, stored in an anti-static bag. Board and sheet-metal carrier look clean with no burnt, bulging or missing components; light handling marks on the metal shield and normal flux residue on the solder side. Not tested.

What's included

• Sheet metal mounting carrier/shield
• Pluggable screw terminal connectors X21, X22, X24
• Anti-static bag

Details

• ABB DSQC611 Panel Board (safety/panel unit) for IRC5 robot controllers
• Revision /06
• Two orange safety relays on board
• RJ45 port (X4) plus multiple Molex-style headers X1, X3, X5-X12
• Pluggable terminal blocks X21, X22 (4-pin), X23, X24 (6-pin)
• Mounted on galvanized sheet-metal carrier with mounting tabs
• Built by Aros Electronics AB for ABB

You are buying exactly what is shown in the photos.