Description:
An economic, medium viscosity, ethyl cyanoacrylate adhesive.
RGC24 is a rapid curing adhesive specially formulated to give good
adhesion to most rubbers and plastics. Good humidity resistance
of cured adhesive. Excellent adhesion to EPDM & SBR rubbers.
Uses
Bond It RGC24 SUPERGLUE can be used for bonding:
Synthetic rubber gaskets in glazing systems.
Assembly of rubber bush systems.
Timbers.
Many plastics.
Application
All surfaces must be clean, dry and grease free. Apply adhesive to
one surface only. Bring components together immediately. ALIGN
PERFECTLY - Once joined components cannot be repositioned.
Maintain light pressure without movement of joint for at least 5
seconds, do not handle until bonding time stated above has
expired.
As the polymerisation of cyanoacrylates is initiated by moisture
from the atmosphere best results will be obtained if the relative
humidity is in excess of 50%. Higher levels of humidity reduce the
opportunity for monomer evaporation thus limiting fume build up.
If bonding is continuous process good ventilation must be
ensured.
Bonding Times
Ambient conditions - room temperature 20°C/ 60% RH:
Plastics 5-30 seconds.
Rubbers 1-15 seconds.
Limitations
Not suitable for permanent glass bonding. Oily or greasy surfaces
cannot be bonded. Olefinic or fluro polymers may require
specialised bonding techniques
Conatiner Size
Available in 50g and 20g plastic bottles.
Shelf Life
6 months from date of manufacture when stored in unopened
bottles.
Storage Conditions
Store in a closed upright container between 5 and 25oC in dry dark
conditions. Uncapped containers will absorb moisture from the air
and will deteriorate in performance rapidly. At low temperatures
the shelf life will be prolonged.
Disposal of Containers
Do not leave empty containers where residue could be harmful to
children, animals or the environment. Replace lids and remove
any containers to a central disposal point in accordance with local
regulations.
Health & Safety
Cyanoacrylate.
Danger.
Bonds skin and eyes in seconds.
Please refer to separate material safety data sheet for full
handling, use and storage instructions. Keep out of reach of
children. It is the users responsibility to determine suitability for
use. If in doubt contact our Technical Department for advice.
Note: this information is for general guidance only, since site conditions
and labour are beyond our control. It is recommended that users make
their own tests to determine suitability.
Specification Summary
Chemical Composition Ethyl Cyanoacrylate
Flash Point >80oC
Flammability Capable of combustion
Boiling Point 65/6mm Hg
Soluble in Water No; Polymerises
Soluble in Acetone Yes; Miscible
Appearance Colourless liquid of low viscosity
Viscosity 80 - 120 p
Specific Gravity (@20o
C) 1.1 - 1.3g/ml
CURED ADHESIVE
Gap Filling Not suitable
Service Temperature Range -55 to +80°C
UFI 7500-W02P-Y00J-Q29K
Bond strength and cure speeds on specific materials are available on
request from our technical department.
Product Details:
Colour: Clear
Code: RGC2420 / RGC2450
Size: 20g / 50g
Package Content
1x Bond It 20g / 50g RGC24 Super Glue Medium Viscosity Cyanoacrylate Adhesive Strong Bottle