ECOLAB UNDERCOUNTER DISHWAHSER U-LT-1

UNIT PICTURED IS UNIT SHIPPED, UNIT HAS BEEN TESTED AND WORKS
SN:W150954023

CAME OUT OF A WORKING SUSHI RESTAURANT THAT IS REMODELING AND GETTING ALL NEW EQUIPMENT. WE HAVE A RETURN POLICY IF UNIT DOES NOT WORK ON ARRIVAL HOWEVER ANY WIRING FOR EQUIPMENT MUST BE COMPLETED BY A LICENSED ELECTRICIAN TO AVOID ELECTRICAL DAMAGE AND NON COVERAGE.

WE CRATE AND SHIP. WE ALSO ADD THIRD PARTY INSURANCE ON SHIPMENTS FOR PIECE OF MIND.
 PLEASE INQUIRE WITH QUESTIONS

These compact units fit underneath low counters and are divided into chemical-sanitizing (Low-Temp) and heat-sanitizing (High-Temp) formats. 
** UNIT NEEDS TO BE HOOKED UP TO HOT WATER TO PROPERLY ACTIVATE SANITIZER SOLUTIONS**
BELOW IS INFORMATION PROVIDED BY THE MANUFACTURER AND ALSO AI
SpecificationLow-Temp Undercounter (U-LT)
Sanitization MethodChemical Sanitizer (EPA Registered)
Operating CapacityApprox. 21 racks per hour
Water Consumption1.2 to 1.4 gallons per rack
Min. Wash Temperature120°F
Min. Rinse Temperature120°F
Total Cycle Time171 seconds (90s wash, 25s dwell, 26s rinse)
Electrical Load115V / 60Hz / 1 Ph (12A draw)
Physical Height33 ¾ inches (Fits standard undercounter profiles)
Drain TypeBuilt-in dedicated drain pump


According to the official Ecolab U-LT manufacturer specification sheet:

Dimensions

 Undercounter Models (Ecolab U-LT / E-UHT Series)
These front-loading units are designed to slide underneath standard commercial stainless steel tables or bar prep counters. 
WE SHIP INTERNATIONAL

DUE TO SIZE THIS ITEM IT WILL SHIP VIA FREIGHT PLEASE SEE INFORMATION BELOW. DONT HESITATE TO ASK IF YOU HAVE QUESTIONS

DELIVERY OF ITEMS OVER 150 LBS

Freight & Logistics Instructions Terms

Due to a substantial weight over 150 lbs unless customer picks up this will be professionally palletized, strapped, and boxed or crated tans shipped via common LTL freight carriers. Otherwise Warehouse pickup is gladly accommodated at our commercial location in Neenah, WI.  

WE CAN SHIP DOMESTIC FREIGHT AND ASSIST WITH SHIPPING INTERNATIONAL FREIGHT.

 WE DO GET VERY GOOD INTERNATIONAL RATES TO MANY AREAS.  AND SURPRISINGLY SOMETIMES WE GET QUOTERS AND CAN SHIP TRANSATLANTIC BY AIR FOR THE SAME COST OR LESS THAN DOMESTICALLY HOWEVER WE WILL NEED TO RUN A CUSTOM QUOTE FOR YOU IF YOUR INTERESTED PLEASE ASK.

Custom Freight Quote or Terminal Locators? Contact Troy for freight Support: 920--419--3898

Most items ship from FOB Stillman Company in Neenah Wisconsin.

1. Baseline Commercial Rates

  • Our standardized lowest cost flat-rate shipping pricing applies **strictly** to commercial or industrial zoning districts that maintain normal daytime operational staffing (Monday thru Friday, 8 AM to 3 PM) and are equipped with a raised loading dock or a forklift capable of accepting and removing a full pallet from a 53-foot tractor-trailer. 

  • Customer may also make freight terminal pickups at a local carrier hub at no fee to the standard baseline rate. Let us know if you wish to do this prior to shipping (PICKUP MUST BE WITHIN 48 HOURS OF FREIGHT ARRIVING AT HUB TO AVOID STORAGE COSTS)

Additional Delivery Services Available for Locations Most special delivery fees range from an additional $25 to $100 depending on area and the freight carrier.
  1. For Non staffed locations Appointment deliveries can be requested prior to shipping. (Additional Fee may apply)
  2. If you do not have a forklift we can schedule a Lift Gate Delivery for a special truck to lower freight to ground.(Additional Fee may apply)

2. Residential, Farm, & Specialized Limited Access Freight Deliveries

  • In accordance with carrier policies and guidelines, deliveries routing to residential areas, home-based businesses, farms, educational facilities, or limited-access zones carriers will likely require a limited access delivery fee. Surcharges to these areas can vary but typically range from $25 to $100 **But can be higher or lower**. You can ask us if this will apply if you are concerned so we can quote you.  We will notify you if a fee applies. 

3. Insurance


  • Typically less than 1% of the time loss or damage can occur during shipment. Some equipment that is rare, high value, specialized or high value may be insurable during shipment. Seller will at times ship some products with third party freight insurance and or buyer may request it. Buyer and Seller agree that insurance is subject to terms based on the carrier or broker. Seller agrees to cooperate and provide available information in event of a claim. Buyer agrees to cooperate in all cases with seller to fulfill insurance requirements in cases of damage or loss during shipment. In some cases this will require buyer to provide timely response, fill out a statement, or provide pictures etc. These actions must be completed timely. Buyer agrees to cooperate with insurance requests. Buyer agrees that Stillman Co cannot guarantee successful claims. Buyer agrees to assist seller in the event of a claim. In some cases return with refund may be the only option however in some cases another option may be the approved mitigation option provided by insurance. Buyer in some cases may be able to keep the product and seller will upon insurance company approval assist buyer with insurance claims to the best of their ability to reimburse, repair, or replace product to the limitation of insurance.  
Crucial Carrier Freight Mandates and Disclosure:
  • Transparent Disclosure: Consignees must accurately verify their structural unloading capacity and zoning type **prior to freight dispatch**. Buyers accept total financial liability for any supplemental transport fees or accessorial charges generated due to undisclosed property parameters.
  • On-Call Communications: You must supply a secure, direct telephone number at checkout. Freight dispatchers will hold freight at the local terminal if the consignee fails to answer delivery scheduling window attempts, incurring storage/redelivery penalties at the buyers expense.
  • Zero Manual Unloading: Commercial freight operators are strictly prohibited by insurance regulations from letting buyers hand-unload loose equipment out of a standard box truck. You must have mechanical extraction equipment on-site or request a hydraulic liftgate truck in advance.
Custom Freight Quote or Terminal Locators? Contact Troy at Logistics Support: 920--419--3898

Legal Terms of Sale & Compliance

1. Receiving Inspections & Transit Damage Management

Do not release the carrier driver without inspection. You **must** completely strip away protective wrapping and visually audit this machinery for concealed transit damages **prior to signing the carrier delivery receipt**. If structural or mechanical damage is discovered, you must write an explicit, highly detailed description of the damage directly onto the driver's delivery manifest and take photographic evidence instantly. Signing a delivery receipt clean clears the carrier of liability, completely voids our insurance tracking loop, and makes any subsequent damage claims impossible.

2. ABSOLUTE WAIVER OF LIABILITY FROM USE, INDEMNIFICATION, AND DEFECT ACKNOWLEDGMENT:

This commercial heavy duty equipment that can easily cause bodily harm or death. By executing payment for this equipment, the buyer acknowledges, understands, and expressly agrees to the following structural legal boundaries:

  • Assumption of Total Risk: By purchasing this product, The buyer accepts all equipment from stillman company at arrival and assume all liability for safety and operation with all known and unknown defects, flaws that may exist beyond visual and physical mechanical testing loops. Buyer accepts product knowing installing and or operating purchased product is under their sole discretion and shall be done using an abundance of caution for themselves and anyone around them and also an abundance of caution for physical buildings and property.

  • Factory New Dealer Equipment and Products - Factory New products that Stillman Co sells based on the description may or may not come with a manufacturer parts warranty. Manufacturer Parts warranty will be provided Subject to standard use and subject to Manufacturer terms and will not over physical damage or accidental damage.  Please see description and pictures. Items labeled as factory new and working will come with a not dead on arrival (DOA) guarantee.  In these cases buyer agrees to accept at seller discretion and pre approval either an option of a return and refund, or parts reimbursement, or a partial reimbursement. Any equipment requiring non standard electrical, gas, licensed, or specialized technician hookup will require documentation that it was properly installed.  This does not include open box, demo, 1 time use products unless specifically stated.  

  • All Other products and Used Equipment :  Buyer accepts as is, and where is upon delivery/pickup pictured unless otherwise agreed to in writing. Return options if offered do not change as is terms of product  and are not guarantees of warranty or safety and . 

  • Zero Seller Liability: Buyer accepts ALL liability for use of product and buyer agrees Stillman Co (the Seller) assumes absolutely zero liability for any physical injury, property damages, mechanical failures, operational disruptions, product loss, or legal compliance fines that may occur during or as a result of installing, utilizing, or operating this heavy commercial machinery for any reason whatsoever.

  • Total Buyer Indemnification: The buyer explicitly assumes 100% of the operational risk and agrees to fully defend, indemnify, and hold harmless the seller against any subsequent claims, damages, losses, liabilities, or expenses arising out of the handling, deployment, or active manufacturing and or use of this equipment.

3. Certified Technical Verification & seller Return Windows

To safeguard against hookup mistakes or facility power phase faults, all mechanical or operational claims must be accompanied by a formal diagnostic invoice from a certified commercial kitchen service company or licensed commercial electrician within three (3) business days of tracking arrival. This used equipment is sold strictly as-is, as-pictured. Approved, uninstalled, and unopened returns are accepted within 14 days; however, the buyer assumes absolute responsibility for coordinating and paying all freight costs both ways, along with any applicable structural 20% restocking fees unless otherwise approved in writing.

Return Window vs. Warranty Definition: Any standard return options are transactional satisfaction periods and are not guarantees. The existence of a return policy is NOT a product warranty, an extended technical guarantee, nor a legal admission certifying that the equipment was entirely perfect or completely defect-free or safe. Buyer understands that seller is stating that this equipment is accepted as is and may come with flaws that may or may not be known or disclosed at time of sale or delivery and it is up to buyer to use dilligence for safe use of product.

3. Legal Venue & Jurisdictional Agreement

Subject to buyer payment for this equipment, the buyer agrees that Any legal actions, or litigation arising from this sale shall be initiated within courts in the State of Wisconsin, Winnebago County.