Programmed 2010-2012 Tahoe Fuel System Control Module | 20827745

Programmed 2010-2012 Tahoe Fuel System Control Module | 20827745
One Year Warranty

Restore Your Tahoe’s Reliability and Power

Is your 2010-2012 Chevrolet Tahoe suffering from frustrating no-start conditions, stalling, or a persistent Check Engine Light? A faulty Fuel System Control Module (FSCM) is often the culprit, leaving you stranded and questioning your vehicle’s dependability. This isn’t just an inconvenience; it’s a critical failure that compromises performance and safety. Get your truck back to its reliable, hardworking self with our direct-fit, VIN-programmed Fuel System Control Module.

Common Symptoms & Your Direct-Fit Solution

A failing FSCM can trigger a range of issues and diagnostic trouble codes (DTCs). If you’re experiencing symptoms like an engine that cranks but won’t start, rough idling, hesitation during acceleration, or codes such as P069E, P0230, P0606, or U0109, it’s time to replace this critical component. Our programmed 2010-2012 Tahoe Fuel System Control Module is the definitive solution, arriving at your door ready for a true ready-to-install replacement. We eliminate the biggest hurdle: the need for an expensive and time-consuming trip to the dealership for programming.

  • ✔ ready-to-install replacement: We pre-program this module to your vehicle’s specific VIN, ensuring it communicates perfectly with your truck’s computer system right out of the box.
  • ✔ Latest GM Software Updates: Your module is flashed with the newest software from General Motors, correcting common factory bugs and optimizing fuel delivery for peak performance and efficiency.
  • ✔ Guaranteed Compatibility: This unit is a direct replacement for multiple part numbers, including 20827745, 20791901, 20877116, and 20850927, guaranteeing a perfect fit and function.
  • ✔ Solve Annoying Fuel Issues: Restore consistent fuel pressure and engine performance, putting an end to unpredictable stalling and starting problems for good.
  • ✔ This unit is backed by our one-year replacement warranty for your peace of mind.

An Expert’s Note on VIN Programming

As a technician, I’ve seen countless vehicle owners buy a used module online, only to find it doesn’t work because it’s not programmed. The FSCM isn’t a simple relay; it’s a computer that precisely controls fuel pump duty cycle based on signals from the ECM. Without being flashed to your specific VIN, it can’t communicate correctly, leading to the same problems you started with, or even new ones. Our pre-programming service isn’t just a convenience—it’s the critical step that makes this a successful, hassle-free repair.

Don’t let a faulty module dictate when and where your Tahoe can go. Take control of your repair with a reliable, professionally programmed 2010-2012 Tahoe Fuel System Control Module and get your truck back on the road with confidence.

Frequently Asked Questions

Why do I need to provide my VIN?

Your vehicle’s 17-digit Vehicle Identification Number (VIN) is essential for us to load the correct GM software and vehicle-specific calibrations onto the module. This step ensures the FSCM works seamlessly with your engine and other computer systems, making the installation truly ready to install.

Is this part difficult to install?

For most GM trucks and SUVs like the Tahoe, the FSCM is located on the driver’s side frame rail, making it accessible for a DIY mechanic with basic tools. It typically involves disconnecting the battery, unplugging the electrical connectors, and removing a few bolts. Always consult a repair manual for your specific vehicle’s procedure.

Will this fix a P069E check engine light code?

Yes, the DTC P069E (Fuel Pump Control Module Commanded OFF) is one of the most common codes indicating a failure of the FSCM. Replacing the faulty module with our correctly programmed 2010-2012 Tahoe Fuel System Control Module is the standard and effective repair for this issue.

What happens if I don’t replace a failing FSCM?

Ignoring a failing FSCM can lead to more frequent and severe issues. What starts as intermittent stalling can become a complete no-start condition, leaving you stranded without warning. It can also cause damage to the fuel pump over time due to incorrect voltage commands.

How do I know this is the correct part for my vehicle?

This module is compatible with a wide range of GM vehicles listed in our fitment guide and replaces several original part numbers. The most important step is providing your VIN during checkout, which allows us to confirm perfect compatibility and program it just for your Tahoe.

Product Details

Category: Fuel Pump Control Module (FPCM)

eBay Item ID: 197654504839

To program your module, we require your full 17-digit VIN. Please enter it in the payment notes and save to ensure we receive it. Orders without a VIN within our 2-business-day handling period may be canceled, as programming cannot proceed without it.

Shipping

  • Processing Time:
    Reliably shipped within 2-3 business days.

Warranty

Enjoy peace of mind with a one-year replacement warranty on this part, effective from the date you receive it. Labor costs are not covered.

If the part fails within the warranty period, we’ll replace it with a comparable unit or refund your purchase price, ensuring a hassle-free experience.

Return Address:

Highway71autoparts

9131 Highway 71 NE
Spicer, MN, 56288