Aavik I-580 Integrated Amplifier

One owner from new and approximately two years old. Used exclusively in a clean, non smoking environment.

The Aavik I-580 is in excellent visual and technical condition. Fully tested and operating perfectly.

Supplied with the accessories shown in the photographs.

Universal input voltage: 100 to 240 V AC

Shipping Information

We ship with FedEx International Priority to all European countries (transit time approximately 2-3 working days) and to the United Kingdom (transit time approximately 3–5 working days).

Please ignore the estimated delivery time shown by eBay.

Fast, secure and fully trackable, delivery is guaranteed.

Ordering from outside the EU?

If you're located outside the European Union, we do not charge VAT on our end so your purchase is VAT free from our side. However, your country’s customs office may apply import duties, taxes, or VAT upon arrival. These charges are not included in our price and are the buyer’s responsibility.

The Aavik I-580 is a reference quality pure analogue integrated amplifier designed and manufactured in Denmark.

Delivering 300 watts per channel into 8 ohms and 600 watts per channel into 4 ohms, the I-580 combines substantial power reserves with speed, control and a highly natural musical presentation.

The I-580 concentrates entirely on analogue preamplification and power amplification. It does not include an internal DAC or phono stage, allowing its power supply and internal circuitry to focus completely on amplification performance.

Five stereo RCA line inputs are provided. Input gain can be adjusted individually, allowing different source components to be matched more closely in level.

Inputs one to four offer adjustable gain from 5 to 15 dB and accept a maximum input level of 4.5 V RMS. Input five offers adjustable gain from 1 to 11 dB and accepts a maximum input level of 6.5 V RMS.

The integrated preamplifier section includes a stereo RCA preamplifier output, allowing connection to a subwoofer, an additional power amplifier or another compatible component.

The I-580 incorporates Aavik’s extensive noise reduction technologies, including 108 Active Tesla Coils, 240 Active Square Tesla Coils, 11 dither circuits and four Anti Aerial Resonance Coils.

The Active Tesla Coils are designed to reduce unwanted electrical noise, while the Active Square Tesla Coils are integrated directly into the circuit boards to operate closer to the signal paths.

The analogue dither circuits are designed to reduce the perceived noise floor and preserve low level musical information. The Anti Aerial Resonance Coils help reduce unwanted high frequency noise associated with internal conductors.

The I-580 also benefits from a solid copper inner chassis. The copper construction helps reduce magnetic hysteresis and provides additional shielding around the sensitive internal circuitry.

Its distinctive titanium top cross and titanium corner elements assist with mechanical resonance control. The main enclosure uses a low resonance composite material rather than a conventional heavy aluminium cabinet.

The amplifier features a large red front display, intuitive multifunction controls and compatibility with an Apple remote control.

Additional functions include adjustable input gain, balance adjustment, home theatre bypass, display brightness control, two trigger outputs and an RS-232 connection for service and firmware updates.

Specifications

Analogue Inputs

5 x stereo RCA line inputs

Input 1 to 4 gain: 5 to 15 dB

Maximum input level for inputs 1 to 4: 4.5 V RMS

Input 5 gain: 1 to 11 dB

Maximum input level for input 5: 6.5 V RMS

Input impedance: 10 kOhm

Preamplifier Output

1 pair of stereo RCA outputs

Maximum output level: 7.5 V RMS

Output impedance: 50 ohms

Line Stage Distortion

Less than 0.005% THD at 1 kHz with 1 V input

Volume Control

76 steps of 1 dB

Speaker Output

2 x 300W into 8 ohms

2 x 600W into 4 ohms

Distortion

THD plus noise: Less than 0.006% from 1W to 100W at 1 kHz into 8 ohms

IMD: Less than 0.002% from 1W to 100W into 4 ohms

TIM: Less than 0.008% from 1W to 100W into 4 ohms

Aavik Noise Reduction

Active Tesla Coils: 108

Active Square Tesla Coils: 240

Dither circuitry: 11

Anti Aerial Resonance Coils: 4

Additional Connections

2 x DC trigger outputs

1 x RS-232 service and firmware connection

Power Consumption

Standby: Less than 0.5W

Idle: Less than 50W

Input Voltage

100 to 240 V AC

50 to 60 Hz

Dimensions

400 x 384 x 102 mm, width x depth x height

Weight

10.7 kg

Colour

Black with titanium details

Country of Manufacture

Denmark

Important Information

The Aavik I-580 is a pure analogue integrated amplifier.

It does not include an internal DAC, streamer or phono stage.

Shipping Information

We ship with FedEx International Priority to all European countries (transit time approximately 2-3 working days) and to the United Kingdom (transit time approximately 3–5 working days).

Please ignore the estimated delivery time shown by eBay.

Fast, secure and fully trackable, delivery is guaranteed.

Ordering from outside the EU?

If you're located outside the European Union, we do not charge VAT on our end so your purchase is VAT free from our side. However, your country’s customs office may apply import duties, taxes, or VAT upon arrival. These charges are not included in our price and are the buyer’s responsibility.