











🕎 LCD display with backlight
🕎 Use the toggle switch on functions and reaches.
🕎 With 3 buttons to lock display value, turn on/off backlight, select resistance, diode or continuity test and change units (DC or AC).
🕎 Data holding, auto-control, over-pallet display, pen light and low battery indicator functions.
🕎 Auto Power Off: It will switch to standby mode automatically in 15 minutes, if there is no operation.
🕎 Anti-slip cover with test probe slots, can protect multimeter and organize probes as well.
🕎 Color: Grey + Blue
🕎 Material: ABS
🕎 Display:6000
✅ Power Supply: 2*1.5V AAA batteries (not included)
✅ Item Size: Approx. 25*5.5*2cm / 9.84*2.17*0.79in
✅ Item Weight:Approx. 142g / 5.01oz (with Test Pobes)
✅ Package Size: Approx. 27*8.9*4.3cm/10.63*3.50*1.69in
✅ Package Weight: Approx. 196g / 6.91oz
Function | 38C Range | 38B Range | Resolution | 38C Accuracy | 38B Accuracy | Comment |
DC Voltage | 600mV | 200mV | 0,1mV | ±(0,5% of rdg +2 digits ) | ±(0,5% of rdg +2 digits ) |
Overload Protection: 600V DC/AC rms Impedance: 10MΩ; more than 100MΩ in the 600mV measuring range |
6V | 2V | 1mV | ±(0,5% of rdg +2 digits ) | ±(0,5% of rdg +2 digits ) | ||
60V | 20V | 10mV | ±(0,5% of rdg +2 digits ) | ±(0,5% of rdg +2 digits ) | ||
600V | 200V | 100mV | ±(0,5% of rdg +2 digits ) | ±(0,5% of rdg +2 digits ) | ||
600V | 600V | 1V | ±(0,8% of rdg +3 digits ) | ±(0,8% of rdg +2 digits ) | ||
AC Voltage | 6V | 2V | 1mV | ±(1,0% of rdg +3 digits ) | ±(0,8% of rdg +3 digits ) | Overload Protection: 600V DC/AC rms Impedance: 10MΩ 38C Frequency range: 40Hz - 400Hz, 38B Frequency range: 40Hz - 2KHz
|
60V | 20V | 10mV | ±(1,0% of rdg +3 digits ) | ±(0,8% of rdg +3 digits ) | ||
600V | 200V | 100mV | ±(1,0% of rdg +3 digits ) | ±(0,8% of rdg +3 digits ) | ||
600V | 600V | 1V | ±(1,5% of rdg +3 digits ) | ±(1,2% of rdg +3 digits ) | ||
Resistance | 600Ω | 200Ω | 0,1Ω | ±(1,0%of rdg +3 digits ) | ±(1,0%of rdg +3 digits ) |
Overload Protection: 600V DC/AC rms |
6kΩ | 2KΩ | 1Ω | ±(1,0%of rdg +2 digits ) | ±(1,0%of rdg +2 digits ) | ||
60kΩ | 20KΩ | 10Ω | ±(1,0%of rdg +2 digits ) | ±(1,0%of rdg +2 digits ) | ||
600kΩ | 200KΩ | 100Ω | ±(1,0%of rdg +2 digits ) | ±(1,0%of rdg +2 digits ) | ||
6MΩ | 2MΩ | 1kΩ | ±(1,0%of rdg +2 digits ) | ±(1,0%of rdg +2 digits ) | ||
60MΩ | 20MΩ | 10kΩ | ±(1,5%of rdg +3 digits ) | ±(1,5%of rdg +3 digits ) | ||
Capacitance | 9,999nF | NO | 1pF | ±(3,0%+10pF) | NO |
Overload Protection: 600V AC rms |
99,99nF | NO | 10pF | ±(2,5%+50pF) | NO | ||
999,9nF | NO | 100pF | ±(2,5%+500pF) | NO | ||
9,999µF | NO | 1nF | ±(2,5%+5nF) | NO | ||
99,99µF | NO | 10nF | ±(5,0%+100nF) | NO | ||
999,9µF | NO | 100nF | ±(10,0%+2µF) | NO | ||
9,999mF | NO | 1µF | ±(10,0%+20µF) | NO | ||
99,99mF | NO | 10µF | ±(10,0%+200µF) | NO | ||
38C Diode Test |
| The display shows the approximate forward voltage. test current approx. 1.5mA; Voltage: about 3.2V DC | ||||
38B Diode Test |
|
Display read approximately forward voltage of diode. Forward DC current approx. 0.5mA,,Reversed DC voltageapprox. 2.2V
| ||||
38C Continuity Test |
| The buzzer sounds when the resistance is less than 50Ω. Open circuit voltage approx. 1.0V | ||||
38B Continuity Test |
| The buzzer sounds when the resistance is less than 50Ω. Open circuit voltage approx. 2.0V | ||||
HP-38B: 2000Count, 200Ω ~ 20MΩ
Description:
🔯【High Accurately Pen Type Digital Multimeter】Voltage Tester accurately measures AC Voltage:2V~600V/DC Voltage:200mV~600V, Resistance Tester from 200Ω ~ 20MΩ,Diode test and Continuity Buzzer.
🔯 【Multifunction Multimeter】Humanized design with 2000 Counts,Diode Test,Continuity buzzer,Data Hold,Resistance tester ,Auto Range Control,Auto Power Off & Low Battery Indication,Back Light and Lamp Light Function.
🔯 【Overrange Indication】 HP-38B Pen Type Multimeter support Double insulation (Class II protection),600V (CAT Ⅲ),This pen type digital multimeter is characterized at slim size, portable and stable performance,a good tool of electrical tester and household electrical problems.
🔯 【Auto Power Off】When measurement exceeds 15 minutes without switching mode and pressing key, the meter will switch to standby mode. Press any key to exit standby mode. And you can also press and hold "SELECT "key to choose the mode of resistance, diode or continuity test and AC/DC Voltage that you like.
Specifications:
Package Include:
1 * Pen Type Digital Multimeter
1 * Tester Pen Cable
1 * User Manual(English)

Voltmeter with data hold function, you can save data with one click, convenient for data reading.

Built-in flashlight and optional back light humanized design, which makes volt data reading easily in dark

This multimeter come with 2 protective caps, which can not only protect your safety, but also protect the pocket voltmeter when it’s laid aside.

