Automotive Smoke Machine Leak Detector EVAP Vacuum Diagnostic Leak Tester
NEW UPGRADE ANCEL S300 Automotive EVAP Smoke Machine Built in Air Pump, EVAP Smoke Machine Leak Tester with Pressure Gauge Flow Meter, Odorless Automotive Smoke Machine Leak Detector, Vacuum Smoke Tester Automotive.
【Built-in Air Pump – Save Time and Space】No need for a separate air supply! With a pressure output range of 0.8-14.5 Psi and a smoke output of 6 L/Min, the ANCEL S-300 automotive smoke machine quickly produces dense smoke, significantly reducing the time it takes to locate leakages. Its integrated design makes it the top choice for smoke tester automotive.
【Real-Time Leak Detection with Adjustable Controls】Monitor pressure and flow rate with precision. The ANCEL S-300 evap smoke machine can fix very small EVAP system issues (P0442/P0456) to improve fuel efficiency and vehicle performance. At the same time, the speed of smoke generation can be controlled by the flow knob to achieve the purpose of rapid diagnosis
【ALL NEW Isolated Heat Conduction】Experience the latest in smoke generation technology. Unlike traditional evap smoke machine leak tester that burn a wick to produce an unpleasant smell, ANCEL S-300 smoke tester uses a safer method of vaporizing the smoke liquid at high temperatures to produce a less smelly smoke. Safer, more efficient, more durable, and can be used for a long time
【Diagnose All Leak Types with Ease】Meet all your car smoke leak tests. Including EVAP systems, Vacuum leaks, Turbo leaks, Intake Manifolds, Cooling/EGR/Exhaust Systems, from worn gaskets to tiny cracks! Powerful smoke leak detection makes the ANCEL S300 car smoke leak tester one of your essential repair tools
【Professional But Easy to Use】Start smoke leak detection in just 3 simple steps: 1, Pour smoke fluid (not included) into the machine. 2, Connect to a power source. 3, Start testing! Even beginners can use it to detect leaks quickly and effortlessly. Weighing just 1.8 kg, the ANCEL car smoke machine is compact and easy to store and transport, making it a must-have tool for every car owner and shop
【Dual Modes for Maximum Savings】ANCEL S300 smoke machine is the best way to save money. The air mode not only doesn't consume smoke oil, but also effectively detects minimal EVAP leaks and vacuum leaks. Switch between air mode for non-consumable testing and smoke mode for pinpointing leaks. The ANCEL S300 smoke machine leak detector helps prevent costly repairs by catching issues early.
【Ideal Smoke Leak Test Gift Package】Out of the box. Contains adapter cone, Intake Bladder, EVAP adapter, full size cap plugs (23 Pcs) and more, allowing you to inject smoke into various openings and clog points! These practical and durable accessories enable you to test different vehicle types such as cars, motorcycles, light pickups, off-road vehicle, snowmobile, boats, ATVs, RVs, vans and more. Now INCLUDED with the ANCEL smoke machine
FAQ: ANCEL S300 Smoke Machine Troubleshooting:
Q1. What do I do if the LED is not turning on? A: Ensure that the smoke machine is connected to the power source correctly with the right polarity.
Q2. What could be causing poor contact of the power line? A: Check the power line with a meter to confirm if it is broken. If it is broken, replace the power lines.
Q3. The pump is on but there is no air output? A: Ensure that the Flow Dial is open anti-clockwise. If the issue persists, replace the pump with a new one.
Q4. There is no smoke output.
A: Check if there is air output by referring to Q3. Check the oil level and refill to the correct level. If the battery voltage is low, check and ensure it is over 12V. If the heater is damaged, replace it if the current consumption is less than 3Amp.
Q5. The smoke output is weak and there are obvious oil drops from the output? A: Change to a compatible smoke oil and check the battery voltage to ensure it is over 12V.
Q6. Why there are slow oil drops from the output? A: Periodically remove the smoke hose and blow it with an air gun.
Q7. What should I do if there is a sudden stop of smoke output? A: The overheat protection may have been activated. Allow the unit to cool down before using it again.
Q1. What do I do if the LED is not turning on? A: Ensure that the smoke machine is connected to the power source correctly with the right polarity.
Q2. What could be causing poor contact of the power line? A: Check the power line with a meter to confirm if it is broken. If it is broken, replace the power lines.
Q3. The pump is on but there is no air output? A: Ensure that the Flow Dial is open anti-clockwise. If the issue persists, replace the pump with a new one.
Q4. There is no smoke output.
A: Check if there is air output by referring to Q3. Check the oil level and refill to the correct level. If the battery voltage is low, check and ensure it is over 12V. If the heater is damaged, replace it if the current consumption is less than 3Amp.
Q5. The smoke output is weak and there are obvious oil drops from the output? A: Change to a compatible smoke oil and check the battery voltage to ensure it is over 12V.
Q6. Why there are slow oil drops from the output? A: Periodically remove the smoke hose and blow it with an air gun.
Q7. What should I do if there is a sudden stop of smoke output? A: The overheat protection may have been activated. Allow the unit to cool down before using it again.
On 20/07/2026 at 19:21:53 AEST, seller added the following information: