Product Description

This 2-pack pool pump hose set is designed for selected above-ground swimming pool filter pumps and circulation systems using a compatible 1.25" or 32mm clamp-on hose connection.

Each hose measures approximately 59" or 1.5m long. Four hose clamps are included to help secure the hoses to compatible pump, filter and pool fittings.

Available Colours

• Blue
• White

Please select the required colour from the drop-down menu before purchasing.

Features

• Includes 2 pool filter pump hoses and 4 hose clamps
• Approximately 1.25" or 32mm inside diameter
• Approximately 59" or 1.5m in length
• Suitable for selected above-ground swimming pool systems
• Flexible PE plastic hose construction
• Suitable for replacing cracked, worn or missing pump hoses
• Clamp-on connection for straightforward installation
• Can be cut to a shorter length when required
• Available in Blue and White

Compatibility

• For selected Intex above-ground pool filter pumps
• For selected Coleman above-ground pool systems
• For selected Bestway above-ground pool systems
• For selected 330 GPH, 530 GPH and 1000 GPH filter pumps
• For selected pump models 603, 607 and 637
• For systems using a compatible 1.25" or 32mm clamp-on hose connection

Specifications

• Product Type: Pool Filter Pump Hose
• Material: PE Plastic
• Available Colours: Blue or White
• Hose Inside Diameter: Approximately 1.25" or 32mm
• Hose Length: Approximately 59" or 1.5m
• Connection Type: Clamp-On
• Hose Quantity: 2 Pieces
• Clamp Quantity: 4 Pieces

Package Includes

• 2 x Pool Filter Pump Hoses
• 4 x Hose Clamps

Installation Guide

1. Turn off and disconnect the pool pump before removing the original hose.
2. Check that the pump and pool fittings are compatible with a 1.25" or 32mm hose.
3. Slide one hose clamp over each end of the replacement hose.
4. Push the hose fully onto the compatible pump, filter or pool fitting.
5. Position the clamps over the connection points and tighten them evenly.
6. Restart the pump and inspect each connection for water leakage.
7. Tighten the clamps slightly if required, but do not overtighten them.

Important Compatibility Notes

• This hose is not universal for every swimming pool pump or filter system.
• Please measure the original hose inside diameter before purchasing.
• Please compare the hose length, connection type and fitting diameter with your original parts.
• Some pump models may use threaded 1.5" hoses instead of 1.25" clamp-on hoses.
• This product is not suitable for systems requiring threaded hose nuts unless suitable adapters are already installed.
• Model numbers and pump flow ratings alone may not confirm compatibility.
• Pool pump, filter, adapters and other fittings are not included.

Additional Notes

• This is a non-original aftermarket replacement accessory.
• The brand names and model numbers are used only to describe compatibility.
• Do not operate the pump if the hose is kinked, damaged or incorrectly secured.
• Check the hoses and clamps regularly during the swimming season.
• Please allow a 1-5mm measurement difference due to manual measurement.
• Actual product colour may vary slightly due to lighting and monitor settings.