Descriptions:

This Paintless Dent Repair T-Bar puller is a lightweight glue tab pulling tool, meant to be used when repairing pressure dents and any dent that isn't sharp or creased.

The tension puller works well with a tap down hammer when pulling large dents.

It's very easy to control, everyone can removal the dent easily by yourself.

How to use:

1.Clean the dent with a clean wet cloth;

2.Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;

3.Use a proper drawing gasket. Large dent requires a large drawing gasket.

4. Pull the trigger and apply the drawing gasket with extruded glue;

5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres;

6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;

7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;

8. Clean the repaired place with a clean wet cloth.

Specifications:

Color: Silver + Blue

Function: Paintless Dent Removal

QTY: 19pcs

Packing included:

1x 2 in 1 Dent Removal T Bar Tools

18x Paintless Dent Repair Glue Pulling Tabs