• Product Description
  •  
  • Direct replacement - this diesel fuel injector matches the fit and functionality of the original equipment injector
  • Durable construction - this injector is remanufactured from quality materials for durability
  • Quality tested - this diesel fuel injector has been tested for quality and fit for this vehicle application
  • Function-Fuel injector transfers gas from the tank into the engine cylinders to provide power for the vehicle. Gas enters the fuel injectors in liquid form then transforms it into a mist then sprays it into the cylinder for efficient and quick burning of fuel.
  •  
  • How to Stop a Fuel Injector Leak.
  •  
  • Step 1
  •  
  • Fuel Injectors Fits Chevrolet Silverado 1500 MC Sierra 1500 2007 2008 2009 5.3L

    Product Description

     

    Direct replacement - this diesel fuel injector matches the fit and functionality of the original equipment injector

    Durable construction - this injector is remanufactured from quality materials for durability

    Quality tested - this diesel fuel injector has been tested for quality and fit for this vehicle application

    Function-Fuel injector transfers gas from the tank into the engine cylinders to provide power for the vehicle. Gas enters the fuel injectors in liquid form then transforms it into a mist then sprays it into the cylinder for efficient and quick burning of fuel.

     

    How to Stop a Fuel Injector Leak.

     

    Step 1

     

    Raise the hood of the car an inspect the fuel injector rail while the car is running at idle. A strong odor of gasoline is a good indicator that there is a fuel leak. Look carefully, however, at the top and bottom of the fuel rail. Use caution: Fuel injection systems are under high-pressure and gas spraying out of the injector seal is highly combustible.

     

    Step 2

     

    Shut the car off immediately if a leak is present. Remove the fuel pump fuse, wrap the leaking injector with a shop towel to soak up the gasoline and start the car. Allow the car to run until it stalls. This step relieves the fuel pressure in the fuel rail and the rail can safely be removed.

     

    Step 3

     

    Disconnect the injector wiring harness and remove the fuel rail bolts that hold the rail in place. Remove any associated fuel lines or hold-down clamps that will prevent the rail from being lifted up to unseat the fuel injectors from the engine. Once it is loose, lift the rail up and remove each of the injectors. They are held in place by snug-fitting O-rings and are easily pulled out. It is not necessary to keep them in order.

     

    Step 4

     

    Remove the upper and lower O-ring seals on the injectors. Place the injectors in a carburetor soaking basket and drop the basket in a bucket of carburetor cleaner. Allow the injectors to soak for several hours to thoroughly clean them of carbon deposits. After soaking, rinse the injectors with clean water and immediately blow them dry with compressed air.

     

    Step 5

     

    Install new O-rings. Make sure the O-rings are designed for use with gasoline and fit the vehicle being serviced. O-rings will quickly deteriorate and fail. Lightly coat the injectors with petroleum jelly and insert them into the fuel rail.

     

    Note

     

    Please check again whether the types you choose are accordance with your make before you pay your order.If you have any concerns about how to choose the type,please send your make/model to us,we can support some relative information for your reference.Please feel free to contact with us,if you have any questions.

     


    Item Specifics
    Brand Fitting_Partszone
    Warranty One Year
    Manufacturer Part Number FT15264701CP
    Interhange Part Number 832-11204, 4G2045, SMP-FJ977, 16-9034,
    Item Weight 1 LB
    Superseded Part Number FJ977, 800-2013N, 67578, MP-56110, M1203,
    OE/OEM Part Number 12594512, 2-39039, 217-2436, FIDL2013N
    Product Type Fuel Injector
    Fitment Type Direct Replacement
    Bundle Listing No
    Placement on Vehicle Front
    Number of hole 4 Hole
    Injector Design Metal & composite plastic
    Connector Color As Shown in the Picture
    Package 8pcs
    O-Rings Included Yes, preinstalled
    Fuel delivery type Fog-type spray
    OE Spec or Performance/Custom OE Spec
    Fuel Type Gasoline
    Performance Part Yes
    Universal Fitment Yes
    Connector Type Male
    Vintage Car Part NO
    Type Fuel Injector

    Payment

    We can accept  Credit card, Debit card, Apple Pay, Google Pay, Visa, or Master Card, and so on. Thank you. 
    Additional shipping fee may be charged for buyers from Puerto Rico, Hawaii, Alaska, Guam, and the U.S. military address of the United States or other remote area (zone 8-10).

    Shipping
    All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
     
    We do not ship to P.O. Boxes, APO/FPO or Military Mail Box.
     
    Returns
    30 Days Free Return and Money Back
     
    If you are not satisfied with your purchase, you can return the item with original packaging back to us for full refund, not any re-stock fee. The return cost should be paid by seller.
     
    If you receive any wrong items, or damage during the transportation or defect items, please contact us, we will send refund to you.
     
    The full refund or replacement will be available for all faulty items, including the original shipping cost.
     
    The guarantee will be only for the cost of the item, we will not responsible for installation or other fees like labor expenses, towing expenses, additional repair expenses or other related expenses.
    Contact Us
    We fully understand how challenging it is to be a successful transaction. If you are not satisfied with our products, please do not hesitate to tell us, our sales representatives will try the best to make you happy. Customer satisfaction is our priority consideration!
    Warning

    Please check the compatibility carefully before purchasing. If you are not sure about the model, please contact us in time.

    Terms & Contact
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    Fuel Injectors Fits Chevrolet Silverado 1500 MC Sierra 1500 2007 2008 2009 5.3L

    Product Description

     

    Direct replacement - this diesel fuel injector matches the fit and functionality of the original equipment injector

    Durable construction - this injector is remanufactured from quality materials for durability

    Quality tested - this diesel fuel injector has been tested for quality and fit for this vehicle application

    Function-Fuel injector transfers gas from the tank into the engine cylinders to provide power for the vehicle. Gas enters the fuel injectors in liquid form then transforms it into a mist then sprays it into the cylinder for efficient and quick burning of fuel.

     

    How to Stop a Fuel Injector Leak.

     

    Step 1

     

    Raise the hood of the car an inspect the fuel injector rail while the car is running at idle. A strong odor of gasoline is a good indicator that there is a fuel leak. Look carefully, however, at the top and bottom of the fuel rail. Use caution: Fuel injection systems are under high-pressure and gas spraying out of the injector seal is highly combustible.

     

    Step 2

     

    Shut the car off immediately if a leak is present. Remove the fuel pump fuse, wrap the leaking injector with a shop towel to soak up the gasoline and start the car. Allow the car to run until it stalls. This step relieves the fuel pressure in the fuel rail and the rail can safely be removed.

     

    Step 3

     

    Disconnect the injector wiring harness and remove the fuel rail bolts that hold the rail in place. Remove any associated fuel lines or hold-down clamps that will prevent the rail from being lifted up to unseat the fuel injectors from the engine. Once it is loose, lift the rail up and remove each of the injectors. They are held in place by snug-fitting O-rings and are easily pulled out. It is not necessary to keep them in order.

     

    Step 4

     

    Remove the upper and lower O-ring seals on the injectors. Place the injectors in a carburetor soaking basket and drop the basket in a bucket of carburetor cleaner. Allow the injectors to soak for several hours to thoroughly clean them of carbon deposits. After soaking, rinse the injectors with clean water and immediately blow them dry with compressed air.

     

    Step 5

     

    Install new O-rings. Make sure the O-rings are designed for use with gasoline and fit the vehicle being serviced. O-rings will quickly deteriorate and fail. Lightly coat the injectors with petroleum jelly and insert them into the fuel rail.

     

    Note

     

    Please check again whether the types you choose are accordance with your make before you pay your order.If you have any concerns about how to choose the type,please send your make/model to us,we can support some relative information for your reference.Please feel free to contact with us,if you have any questions.

     



    We can accept  Credit card, Debit card, Apple Pay, Google Pay, Visa, or Master Card, and so on. Thank you. 
    Additional shipping fee may be charged for buyers from Puerto Rico, Hawaii, Alaska, Guam, and the U.S. military address of the United States or other remote area (zone 8-10).

    All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
     
    We do not ship to P.O. Boxes, APO/FPO or Military Mail Box.
     
    30 Days Free Return and Money Back
     
    If you are not satisfied with your purchase, you can return the item with original packaging back to us for full refund, not any re-stock fee. The return cost should be paid by seller.
     
    If you receive any wrong items, or damage during the transportation or defect items, please contact us, we will send refund to you.
     
    The full refund or replacement will be available for all faulty items, including the original shipping cost.
     
    The guarantee will be only for the cost of the item, we will not responsible for installation or other fees like labor expenses, towing expenses, additional repair expenses or other related expenses.
    We fully understand how challenging it is to be a successful transaction. If you are not satisfied with our products, please do not hesitate to tell us, our sales representatives will try the best to make you happy. Customer satisfaction is our priority consideration!

    Please check the compatibility carefully before purchasing. If you are not sure about the model, please contact us in time.


    All rights reserved.