This sale is for one (1)
The Blum "Modul" line was produced in the late 80's until phased out in the early 2000's. Most parts have become hard to find. I list them as I find them.
Blum 170-degree Modul hinges attach using a screw mounted on the Blum Modul base plate and feature 3-dimensional door adjustment. It will open 170 degrees.
HINGE Model# in Blum book: 91A6500.
Identifying marks on hinge: "80A550-01" or "80.550-01......"Blum" "Made in Austria" "-Nr 2623470" On Hinge arm "80.610-03.02F, "610-02, and 90A510-06. Please note that these numbers changed a lot over the years and mostly identify individual parts of the hinge....Basically, you will either have the more common straight-arm (3/4" or "full" overlay) or the less-common cranked arm (about 3/8", or "half" overlay). Cranked-arms were use on inset doors or twin door applications, that is, where you have back-to-back doors on a divider (not usually done on face frame applications). Cranked-arms are also visibly taller at the rear of the hinge compared to straight-arm.. But chances are, if you do have face frame style cabinetry....then straight-arm hinges are what you're looking for. This sale is for the straight-arm hinge.
It is your responsibility to determine if this hinge will work for your installation! If you have questions, please contact me.
These hinges are no longer available from Blum or Blum distributors.
Technical info:
Hinge bores use a 35 mm bit drilled 1/2" deep.
An order consists of One Hinge, One Mounting Plate and Five #6 x 5/8" FHP Wood Screws. Your order will go out in a USPS Flat-Rate Box or Ground Advantage Padded Envelope (2-5 day delivery) to anywhere the US Post Office will deliver. This includes Alaska, Hawaii, Puerto Rico and other US Territories. Can also ship overseas via International Shipping Center.
Please contact me with any questions or before leaving poor feedback. Thanks for looking!