Ultrasonic Flow Detector Flow Meter With SD Card Data Logger for DN50 to 700mm

 

 

 

Note: 

1.  This flow meter comes with Clamp-on Transducer TM-1 Medium Clip(size: 64*39*44mm ) for Pipe Diameter DN50 to 700mm, Temperature : -30~90°C

2. Comes with SD card

 

Introduction of Ultrasonic flow meter:

• Flowmeter can be virtually applied to a wide range of long-term online measurement. Convertor protection class IP67, transducer protection class IP98.

• A variety of liquid applications can be accommodated: ultra-pure liquids, portable water, chemicals, raw sweage, reclaimed watere, cooling water, river water,plant.etc

Feature :

High Accuracy: 1%

Wide measuring range : Several types transducer for selection, pipe size from Dn15mm to Dn6000mm (optional)

High Reliability

Adopt low voltage, multi-pulse technology to improve accuracy, operation life and reliability.

Strong Anti-interference

Dual-balance signal differential receiver/driver circuit to avoid interference of converter, TV tower, high voltage line etc.

Powerful Recording Function

Automatically record the following data:

1. The totalizer data of the last 512 days/128 months/10 years

2. The time and corresponding flow rate of the last 6 4 times of power on and off events

3. The working status of the last 32 days

Support Heat Measurement

Connect the temperature transducer ,can finish the heat/energy measurement

Support SD card Memory

Working Environment:

	Main Unit	Transducer
Protection Level	IP67	IP68
Humidity	≤85%RH
Temperature	-20~60℃	-30~160℃

Basic Parameters:

Accuracy	≤1%
Velocity range	0~±10m/s, Bi-directional measurement
Pipe size	DN50-700mm
Temperature	-30~90℃
Type of liquid	Single liquid can transmit ultrasound, such as water, sea water, sewage, oil, alcohol, etc.
Pipe material	Steel, stainless steel, cast iron, copper, PVC, aluminmum, glass steel, etc. Liner is allowed.
Signal output	1 way 4-20mA output 1 way OCT pulse output 1 way Relay output
Signal input	3 way 4-20mA input, achieve to heat measurement by connecting PT100 platinum resistor.
Interface	RS485, support MODBUS
Data storage	SD card regularly store the pre-set results(optional)
Power supply	DC8~36V or AC85~264V

 

Standard Configurations:

1. Ultrasonic Flowmeter

2. A pair TM-1 Transducer

3. 2 x5m Signal cable

4. Steel Belt

5. Certificate of Warranty

6. SD Card