⚠️ MINIATURE SWITCH - CHECK SIZE BEFORE BUYING! This switch is only 15 x 10mm (1/2" x 3/8") - about the size of a fingernail. Panel cutout: 13.5 x 9mm (0.53" x 0.35"). Please verify these dimensions fit your panel before ordering.
Black KCD117S SPST 2-pin mini rocker switch. Simple ON/OFF two-position switching. Rated 125VAC/6A, 250VAC/3A. Snap-in panel mount - no screws needed.
Two solder lug terminals - wire in series with your load. ON = circuit closed, current flows. OFF = circuit open. No polarity - either pin can be input or output.
Ideal for small project enclosures, Arduino/ESP32/Raspberry Pi housings, LED lighting, automotive accessories, RC vehicles, and DIY electronics.
Rated for AC loads. For DC applications, derate accordingly. Solder lug terminals require soldering or crimp connectors. Available in 2, 5, or 10 packs.
Ships from the US. Fast free shipping. Hassle-free returns.
Miniature Black SPST Rocker Switch - ON/OFF, 2-Pin, 125VAC/6A, 15mm × 10mm (½" × ⅜") KCD117S - Multi-Pack
⚠️ MINIATURE SWITCH -- PLEASE CHECK SIZE BEFORE PURCHASING
This switch measures just 15mm × 10mm (approximately ½" × ⅜") -- about the size of a fingernail. It requires a 13.5mm × 9mm (0.53" × 0.35") panel cutout. Please review the dimensional drawing in the photo gallery to confirm it fits your application before ordering.
Need a reliable ON/OFF switch that fits in tight spaces? The KCD117S Miniature Rocker Switch packs full-size electrical performance -- 6A at 125VAC / 3A at 250VAC -- into a compact snap-in package that's barely half an inch long. Its SPST (Single Pole, Single Throw) 2-pin design makes wiring simple: two terminals, one circuit, on or off. The snap-in retention clips press directly into a rectangular panel cutout with no screws or mounting hardware needed.
📏 How small is it? This switch is approximately the size of an adult fingernail. See the photos above for a dimensional drawing and size comparison.
⚡ Key Features
- Miniature Form Factor: Just 15mm × 10mm face (½" × ⅜") -- fits where standard rocker switches can't.
- Full-Size Electrical Rating: 125VAC / 6A and 250VAC / 3A -- handles real loads despite its small size.
- Simple SPST Operation: 2-pin ON/OFF -- one circuit, no complicated wiring.
- Snap-In Panel Mount: Press-fit into a 13.5mm × 9mm rectangular cutout. No screws or mounting hardware required.
- Tactile Rocker Action: Positive click feel confirms switching state.
- Multi-Pack Value: Available in 2-pack, 5-pack, and 10-pack quantities.
📐 Specifications
| Switch Type |
SPST (Single Pole, Single Throw) -- ON/OFF |
| Terminals |
2-pin solder lug |
| Electrical Rating |
125VAC / 6A -- 250VAC / 3A |
| Overall Dimensions |
14.8 × 10.3 × 16.5mm (0.58" × 0.40" × 0.65") L × W × H |
| Panel Cutout |
13.5 × 9mm (0.53" × 0.35") |
| Model |
KCD117S |
| Color |
Black |
| Material |
Plastic body, metal contacts |
| Mounting |
Snap-in (press-fit retention clips) |
📦 What's in the Box
- 2, 5, or 10 × KCD117S Black Mini Rocker Switch (per selected variation)
🎯 Typical Applications
- Small electronics enclosures and project boxes
- Arduino, ESP32, and Raspberry Pi project housings
- LED strip and lighting control panels
- Automotive and marine accessory switches
- DIY battery packs and portable power devices
- RC vehicles and hobby electronics
- Control panels and instrument enclosures
- Any application where space is limited and a standard rocker switch is too large
⚠️ Important Notes
- This is a MINIATURE switch -- approximately ½ inch long by ⅜ inch wide (15mm × 10mm). It is significantly smaller than a standard rocker switch. Please verify the dimensions meet your needs before purchasing.
- Panel cutout required: 13.5mm × 9mm (0.53" × 0.35") rectangular hole.
- Rated for AC loads only (125VAC/6A, 250VAC/3A). For DC applications, derate accordingly.
- Solder lug terminals -- soldering or crimp connectors required for wiring.
- Do not exceed the rated voltage or current specifications.
📏 SIZE REMINDER
This is a miniature switch -- approximately ½ inch long by ⅜ inch wide (15mm × 10mm), about the size of a fingernail. If you need a larger rocker switch, please check our eBay Store for standard-size options.
🏪 About Envistia Mall
Envistia Mall is a US-based electronics retailer specializing in development boards, sensors, modules, and components for makers, engineers, and educators. We ship from the United States with fast handling times. Product documentation and technical support are available at our dedicated support site.
📦 Fast Free US Shipping | 🔄 Hassle-Free Returns | 📧 Responsive Customer Support
Visit our eBay Store for more switches, LEDs, connectors, Arduino boards, sensors, and electronic components for your projects.
