• Product Description
  •  
  • · Direct replacement - This switch fits, functions and matches the appearance of the original switch for a perfect replacement every time
  • · Quality construction - manufactured from premium materials for a long service life
  • · Excellent value - original equipment quality at a lower price
  • · Quality tested - has undergone simulation and endurance testing to ensure proper fit and performance
  •  
  • How to Install a Power Window Switch
  •  
  • For Chevrolet Silverado 1500 2007-2013 Window Control Switch Front Left

    Product Description

     

    · Direct replacement - This switch fits, functions and matches the appearance of the original switch for a perfect replacement every time

    · Quality construction - manufactured from premium materials for a long service life

    · Excellent value - original equipment quality at a lower price

    · Quality tested - has undergone simulation and endurance testing to ensure proper fit and performance

     

    How to Install a Power Window Switch

     

    Step 1 - Pry off Bezel
    Using a flat head screwdriver you can pry up the bezel that the switch is in. You do not have to remove the door casing or the handle of the door. You simply pry gently on the power window switch bezel to get at the housing.

     

    Step 2 - Remove from Bezel
    Once the bezel comes loose, you will notice some tabs that hold it into place. Press down on the locking tab and it will come loose. Hold up the switch and bezel and look for some tabs that hold the switch to the bezel itself. Pry these with a little pressure from the screwdriver and pop the switch from the bezel.

     

    Step 3 - Remove Rockers from Switch
    Once you have the power window switch out of the bezel, remove it from the outlet. This is simply disconnecting it from the wire harness. Remove the rockers from the window switch and make sure that you know which direction they go when transferring to the new switch. Mark the front with a small piece of tape so you know where to place them on the new switch.

     

    Step 4 - Assemble New Switch
    With the rockers in hand, you can then install them onto the new switch. Take an extra minute to reassure yourself that you have them facing in the right direction. Remove the tape, if you used any, and then connect the wires back to the switch. Pop back into the bezel holder and slide the assembly back into the hole in the door. Push the assembly back in place and make sure you hear the tab snap. Test out the rockers to see if the switch moves the way that it should.

     

    Step 5 - Test Window
    Turn your car on and see if the new power window switch works.

     


    Item Specifics
    Brand Fitting_Partszone
    Manufacturer Part Number FT12421601PS
    Manufacturer Warranty 1 Year
    Interchange Part Number 15873293, 20945129, 25789692
    OE/OEM Part Number 901-341,DWS136,SM1722,D1954F,387143
    Superseded Part Number 25789692
    Placement on Vehicle Front Left
    Type Push Switch
    Fitment Type Direct Replacement
    Location Side Front Left
    To Control Window
    Condition New
    Terminal Quantity 8; 6
    Terminal Type Blade
    Terminal Gender Male
    Connect Gender Female
    Custom Bundle No
    Mounting Hardware Included No
    Color Shown as picture
    Package Quantity 1 pc
    Package Type Box
    Package Contents 1 Switch
    OE Spec or Performance/Custom OE Spec
    Housing Material Plastic
    Modified Item No
    Performance Part No
    Universal Fitment No
    Features Durable

    Payment

    We can accept  Credit card, Debit card, Apple Pay, Google Pay, Visa, or Master Card, and so on. Thank you. 
    Additional shipping fee may be charged for buyers from Puerto Rico, Hawaii, Alaska, Guam, and the U.S. military address of the United States or other remote area (zone 8-10).

    Shipping
    All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
     
    We do not ship to P.O. Boxes, APO/FPO or Military Mail Box.
     
    Returns
    30 Days Free Return and Money Back
     
    If you are not satisfied with your purchase, you can return the item with original packaging back to us for full refund, not any re-stock fee. The return cost should be paid by seller.
     
    If you receive any wrong items, or damage during the transportation or defect items, please contact us, we will send refund to you.
     
    The full refund or replacement will be available for all faulty items, including the original shipping cost.
     
    The guarantee will be only for the cost of the item, we will not responsible for installation or other fees like labor expenses, towing expenses, additional repair expenses or other related expenses.
    Contact Us
    We fully understand how challenging it is to be a successful transaction. If you are not satisfied with our products, please do not hesitate to tell us, our sales representatives will try the best to make you happy. Customer satisfaction is our priority consideration!
    Warning

    Please check the compatibility carefully before purchasing. If you are not sure about the model, please contact us in time.

    Terms & Contact
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    For Chevrolet Silverado 1500 2007-2013 Window Control Switch Front Left

    Product Description

     

    · Direct replacement - This switch fits, functions and matches the appearance of the original switch for a perfect replacement every time

    · Quality construction - manufactured from premium materials for a long service life

    · Excellent value - original equipment quality at a lower price

    · Quality tested - has undergone simulation and endurance testing to ensure proper fit and performance

     

    How to Install a Power Window Switch

     

    Step 1 - Pry off Bezel
    Using a flat head screwdriver you can pry up the bezel that the switch is in. You do not have to remove the door casing or the handle of the door. You simply pry gently on the power window switch bezel to get at the housing.

     

    Step 2 - Remove from Bezel
    Once the bezel comes loose, you will notice some tabs that hold it into place. Press down on the locking tab and it will come loose. Hold up the switch and bezel and look for some tabs that hold the switch to the bezel itself. Pry these with a little pressure from the screwdriver and pop the switch from the bezel.

     

    Step 3 - Remove Rockers from Switch
    Once you have the power window switch out of the bezel, remove it from the outlet. This is simply disconnecting it from the wire harness. Remove the rockers from the window switch and make sure that you know which direction they go when transferring to the new switch. Mark the front with a small piece of tape so you know where to place them on the new switch.

     

    Step 4 - Assemble New Switch
    With the rockers in hand, you can then install them onto the new switch. Take an extra minute to reassure yourself that you have them facing in the right direction. Remove the tape, if you used any, and then connect the wires back to the switch. Pop back into the bezel holder and slide the assembly back into the hole in the door. Push the assembly back in place and make sure you hear the tab snap. Test out the rockers to see if the switch moves the way that it should.

     

    Step 5 - Test Window
    Turn your car on and see if the new power window switch works.

     



    We can accept  Credit card, Debit card, Apple Pay, Google Pay, Visa, or Master Card, and so on. Thank you. 
    Additional shipping fee may be charged for buyers from Puerto Rico, Hawaii, Alaska, Guam, and the U.S. military address of the United States or other remote area (zone 8-10).

    All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.
     
    We do not ship to P.O. Boxes, APO/FPO or Military Mail Box.
     
    30 Days Free Return and Money Back
     
    If you are not satisfied with your purchase, you can return the item with original packaging back to us for full refund, not any re-stock fee. The return cost should be paid by seller.
     
    If you receive any wrong items, or damage during the transportation or defect items, please contact us, we will send refund to you.
     
    The full refund or replacement will be available for all faulty items, including the original shipping cost.
     
    The guarantee will be only for the cost of the item, we will not responsible for installation or other fees like labor expenses, towing expenses, additional repair expenses or other related expenses.
    We fully understand how challenging it is to be a successful transaction. If you are not satisfied with our products, please do not hesitate to tell us, our sales representatives will try the best to make you happy. Customer satisfaction is our priority consideration!

    Please check the compatibility carefully before purchasing. If you are not sure about the model, please contact us in time.


    All rights reserved.