1. Description
This machine utilizes constant current and constant voltage technology, featuring overload and overheating protection, which effectively addresses the frequent failures of traditional electrolyzers, such as fuses burning or components overheating. The current is stepless adjustable, highly controllable, safe, and reliable, and has a low failure rate.
The machine is primarily used in the dental repair room and is essential equipment for polishing the surfaces of various dental castings. This machine is equipped with a positive pole swing function and uniform surface polishing.
2. The Main Advantages
① The output voltage of the machine is stable, the control is in the best range, the current distribution is uniform, effectively avoiding excessive electrolysis influence on workpiece size.
② The machine is equipped with an anode swing function, which can make the workpiece surface polishing evenly.
③ Electrolytic anode selection of special high-conductivity material, no oxidation, good conductivity, and no polishing maintenance.
④ Using an electrolytic cell as a conductive cathode can make the workpiece 360° electrolytic, polishing without a dead angle, and the electrolytic cell capacity can be used to electrolyte multiple workpieces.
⑤ Electrolyte heating is slow, effective protection of electrolyte, prolongs the service life of electrolyte, and reduces cost.
⑥ The work piece quickly brightens, improving efficiency.
⑦ The current is controllable, which completely avoids the frequent current rise of traditional electrolysis machines that may burn out fuses and components.
⑧ The choice of a precision potentiometer allows for more accurate adjustment of the current.
⑨ With overload, overheating protection function, and longer service life.
⑩ Below the electrolytic cell is equipped with a discharge valve for convenient and quick replacement of electrolyte.
3. Specifications
① Voltage: 110V
② Power: 550W
③ Timer: 0-999min
④ Working current: 0~30A
⑤ Weight: 11.5kg
⑥ Electrolytic cell capacity: 5000ml
4. Operating Steps
① Pour the electrolyte into the electrolytic cell and fill it with about 5 kilograms of electrolyte.
② The work piece is hung on the black positive rod with the red copper wire matched by the machine. According to the size of the workpiece, copper wire of different lengths is cut.
③ Set the working time and adjust the current. Adjust the working time and current appropriately according to the size of the workpiece and the new and old degree of the electrolyte.
④ After setting the time, remove the work piece and clean it with water.
The sale of this item may be subject to regulation by the U.S. Food
and Drug Administration and state and local regulatory agencies.
So you can bid it on this item only if you are an authorized purchaser.
If the item is subject to FDA regulation,We have to verify your status
as an authorized purchaser of this item before shipping of the item.
Thanks for your understanding!
