




|
|
|
||||||
|
|
|
|
|
|||
Specifications
Position: Front
Lugs: 5 Bolt
ABS on Hub: Encoder
Flange Type: 4-Bolt Square
Year: 2008-2013 (Rogue), 2014-2015 (Rogue Select), 2007-2012 (Sentra)
Make: For Nissan
Model: For Rogue, Rogue Select, Sentra
Position: Front Left & Front Right (this set includes both)
Part Numbers: 513298, 40202EN010, 40202JG000, 40202JG01A, 40202JG01B
Kit Includes:
2 x Front Wheel Hub and Bearing Assembly - 513298
COMPLETE VEHICLE FITMENT GUIDE
NISSAN ROGUE 2008 - 2013 All Models
NISSAN ROGUE SELECT 2014 - 2015 All Models
NISSAN SENTRA 2007 - 2012 SE-R, SE-R SPEC V Models ONLY
INSTALLATION NOTES
Professional installation recommended if not experienced
Disconnect battery negative terminal before starting
Jack up vehicle and secure with jack stands
Remove wheel and brake caliper (hang caliper – do not let it hang by brake line)
Remove brake rotor
Remove axle nut (may require impact wrench)
Remove wheel hub mounting bolts (typically 4 bolts from behind)
Remove old hub assembly
Clean mounting surface thoroughly
Install new hub assembly with mounting bolts – torque to specification
Reinstall axle nut – torque to specification
Reinstall brake rotor, caliper, and wheel
Reconnect battery
Test drive to verify proper operation
TECHNICAL SPECIFICATIONS
Part Number: 513298 / 40202JG000
Type: Wheel Bearing Hub Assembly (Pre-Assembled)
Position: Front Left & Front Right
Bearing Type: Ball Bearing
Material: High-strength metal housing
Mounting: Bolt-on (4 bolts)
ABS Sensor: Integrated tone ring for ABS function
Wheel Studs: Pre-installed
❓ FREQUENTLY ASKED QUESTIONS
Q: Will this fit my 2010 Nissan Rogue AWD?
A: Yes, both FWD and AWD models use the same front wheel bearing hub assembly.
Q: Does this set include both left and right sides?
A: Yes! This is a complete set of 2 – one for the left (driver side) and one for the right (passenger side).
Q: Is this a genuine Nissan part?
A: This is a premium aftermarket replacement manufactured to meet or exceed OEM specifications. It directly replaces Nissan part numbers 40202EN010, 40202JG000, 40202JG01A, and 40202JG01B.
Q: Will this fit my 2009 Nissan Sentra?
A: Yes, 2007-2012 Nissan Sentra is compatible.
Q: Do I need to press the bearing into the hub?
A: No! This is a complete pre-assembled unit. Just bolt it on – no pressing required.
Q: Will this fix the humming noise from my front wheel?
A: If the noise is caused by a worn wheel bearing, yes. The humming or growling noise that increases with speed is a classic symptom of bad wheel bearings.
Q: Does this include the ABS sensor?
A: The assembly includes the tone ring for ABS, but the ABS sensor itself is separate and reused from your vehicle.
Q: Do I need an alignment after installation?
A: An alignment is not strictly required for wheel bearing replacement, but it's a good practice, especially if you've removed suspension components.
| Item Specifics | |
|---|---|
| Brand | CarBole |
| Type | Wheel Hub & Bearing Assembly |
| Placement on Vehicle | Front, Left, Right |
| Wheel Stud Quantity | 5 |
| Items Included | 2PCS Front Where Hub and Bearing Assembly |
| Fitment Type | Direct Replacement |
| Manufacturer Part Number | 513298 |
| OE/OEM Part Number | 513298 |
| Manufacturer Warranty | Lifetime |
| Part Numbers | 40202EN010, 40202JG000, 40202JG01A, 40202JG01B |
| Part Numbers 1 | 513298, BR930197, HA590673 |
| Make | For Nissan |
| Year | 2007-2015 |
| Model | For Rogue, Rogue Select, Sentra |





New-autosupply
Best choice of motor parts

Shop Category Excellent Delivery Best Quality |
Pair Front Wheel Bearing Hub Assembly For 2008-13 Nissan Rogue 2014-2015 Select
Specifications Year: 2008-2013 (Rogue), 2014-2015 (Rogue Select), 2007-2012 (Sentra)
COMPLETE VEHICLE FITMENT GUIDE
INSTALLATION NOTES Professional installation recommended if not experienced Disconnect battery negative terminal before starting Jack up vehicle and secure with jack stands Remove wheel and brake caliper (hang caliper – do not let it hang by brake line) Remove brake rotor Remove axle nut (may require impact wrench) Remove wheel hub mounting bolts (typically 4 bolts from behind) Remove old hub assembly Clean mounting surface thoroughly Install new hub assembly with mounting bolts – torque to specification Reinstall axle nut – torque to specification Reinstall brake rotor, caliper, and wheel Reconnect battery Test drive to verify proper operation
TECHNICAL SPECIFICATIONS
❓ FREQUENTLY ASKED QUESTIONS Q: Will this fit my 2010 Nissan Rogue AWD? Q: Does this set include both left and right sides? Q: Is this a genuine Nissan part? Q: Will this fit my 2009 Nissan Sentra? Q: Do I need to press the bearing into the hub? Q: Will this fix the humming noise from my front wheel? Q: Does this include the ABS sensor? Q: Do I need an alignment after installation?
All rights reserved. |
||||||||||||||||||||||||||||||||||||||||